Archer MR600 is not power on after one month later

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR600 is not power on after one month later

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR600 is not power on after one month later
Archer MR600 is not power on after one month later
2022-05-13 11:12:18
Model: Archer MR600  
Hardware Version: V2
Firmware Version:

i have problem with wifi router is not power on even i tried to do...i used it last month..and its working smooth,but yesterday it does not work...just blink power icon on router..after that its not working..

  1      
  1      
#1
Options
1 Reply
Re:Archer MR600 is not power on after one month later
2022-05-16 02:08:45

  @Rdeeps 

 

Hi, thank you very much for the feedback.

Are you still using the original power adapter? please check the specification of the power adapter. The MR600 V2 needs power supply with 12V 1.5A.

 

Besides, before the problem happens, was there any power outage or were you updating firmware for it?

Please try different wall sockets, and also try factory reset: press and hold the reset button for about 10s to see if problem can be resolved.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  2  
  2  
#2
Options