MR600 - Carrier Aggregation not happening in India network?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I brought MR600 to improve my working home experience with stable and speed internet, after some research I found Archer MR600 is doing carrier Aggregation and would fit my needs.
Below are the hardware details:
Firmware Version:1.5.0 0.9.1 v0001.0 Build 210914 Rel.59719n
Hardware Version:Archer MR600 v2 00000002
I have tried with both Airtel and Jio its allowing for manual band selection but when we go and check the status it always only one band is selected, whole purpose of buying is it will support carrier aggregation.
Please help me how to achieve the carrier aggreation with India network and with MR600 V2 version.
I have a mobile OnePlus8Pro with Airtel SIM carrier aggregation 1800(Band3) and 900(Band 8) is happening and when inserted same SIM into the router carrier aggregation is not happening and the router selects either Band3 or Band8.
One more observation is when I selected Bands as Auto, I see that band3 only is selected and Network Type is 4G+ LTE. I have purchased this router 3 days back and am still in replacement window, let me know if the router is defective or there is something else that needs to be done to achieve the carrier aggregation.
with the same SIM see the carrier aggregation happening in mobile in the same location.
Also, as suggested sent system log from Ui to support.forum@tp-link.com