Unable to port forward 44158 on Archer A8

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Unable to port forward 44158 on Archer A8

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Unable to port forward 44158 on Archer A8
Unable to port forward 44158 on Archer A8
2022-02-27 15:12:56 - last edited 2022-06-09 02:48:57
Model: Archer A8  
Hardware Version: V1
Firmware Version: Firmware Version: 1.4.6 Build 200628 Rel.56565n(5553)

 

Hi when attempting to add port forwarding for my helium hotspot I receive the following message.  I am unable to change the internal ports of the hotspot and so I must use port 44158 but am unable to do so.  This is my only port forward so I have no added any conflicts myself.  It seems to be something internal that is reserved? 

I am adding the text as well to make is searchable

Conflicting with existing port: 44158.  To avoid conflict, please enter another value.

 

 

I have read in another forum where a custom formware was provided (for a different port but the sme error message) also some unresolved issues matching mine. 

Thanks!

  0      
  0      
#1
Options
1 Accepted Solution
Re:Unable to port forward 44158 on Archer A8-Solution
2022-03-21 20:45:55 - last edited 2022-03-22 06:12:19

Hi  @Kevin_Z  removing all Ethernet wires and then rebooting allowed me to forward this. 
 

thanks!

Recommended Solution
  1  
  1  
#5
Options
5 Reply
Re:Unable to port forward 44158 on Archer A8
2022-02-27 17:58:59

  @Jaredskar 

 

Follow this post and see if that will resolve your issue.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Unable to port forward 44158 on Archer A8
2022-02-28 03:22:38
Thanks for your suggestion. I did disable Upnp and rebooted the router. I still get the same error thoug and am unable to forward the port
  0  
  0  
#3
Options
Re:Unable to port forward 44158 on Archer A8
2022-03-01 03:41:00

Jaredskar wrote

Thanks for your suggestion. I did disable Upnp and rebooted the router. I still get the same error thoug and am unable to forward the port

 

Hello @Jaredskar, please try the following:

Disconnect all devices from the C80 network, or power them off when that's convenient, then restart the C80 to release the connections, connect only one device to the C80 after the restart, then confirm if you can open port 44158.

 

Please let me know the test result, thanks.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Unable to port forward 44158 on Archer A8-Solution
2022-03-21 20:45:55 - last edited 2022-03-22 06:12:19

Hi  @Kevin_Z  removing all Ethernet wires and then rebooting allowed me to forward this. 
 

thanks!

Recommended Solution
  1  
  1  
#5
Options
Re:Unable to port forward 44158 on Archer A8
2022-03-22 06:16:50

@Jaredskar 

 

Awesome! That's great to hear. This means there might be some other devices or services in your network that occupy 44158 port and you cannot open it for other services.

 

I'm going to mark your reply as the “Recommended Solution” so others can be confident in benefiting from the solution.

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options