Airtel India Band 1 - Archer MR600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Airtel India Band 1 - Archer MR600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Airtel India Band 1 - Archer MR600
Airtel India Band 1 - Archer MR600
2022-02-22 17:07:14
Model: Archer MR600  
Hardware Version: V2
Firmware Version: 1.5.0 0.9.1 v0001.0 Build 210914 Rel.59719n

For two months, I have been using Band 1 + Band 3 on Airtel (India).

This combination was excellent and 45mb download around 10mb upload was consistently being achieved. 

Since the past week or so, Band 1 is not being received and I am unable to select it. 

Unfortunately, Band 3, 8 and 40 simply do not give me the same speed or reliability as Band 1.

I have currently switched to Band 40 and sometimes Band 3 only, but the speeds are much lower than Band 1.

Why has Band 1 simply disappeared? Is this a router issue?

Please advise. 

  0      
  0      
#1
Options
4 Reply
Re:Airtel India Band 1 - Archer MR600
2022-02-25 02:27:58

  @Txiku 

Hi, have you tried to put the SIM card into the smartphone and check whether B1 is able to be detected?

--if yes, what is the exact bandwidth of B1 on the smartphone?

Have you tried to reboot and reset the router once to see whether it made any difference?

  0  
  0  
#2
Options
Re:Airtel India Band 1 - Archer MR600
2022-02-25 11:35:37

  @David-TP Thanks for your message.

I have rebooted the router a few times but that has not made a difference.

I'll try the sim in a phone and report back if B1 is available. Need to figure out how to select a particular band on an iPhone. 

Thanks. Will get back to you.  

  0  
  0  
#3
Options
Re:Airtel India Band 1 - Archer MR600
2022-06-15 02:40:14

  @David-TP Apologies for the time it has taken me to get back.

I tested the SIM card in a smartphone and it is not latching onto B1.

On the MR600 only B3 and B40 are now available for selection, where as earlier B1 was available and worked great with around 50mb download and 15mb upload speed.

My speed has reduced significantly now that B1 is not available. 

Yes, I tried to reboot and reset the router to see whether it made any difference but no luck.

Could it be that the carrier (Airtel) has simply made B1 unavailable recently? Is this common practice? 

  0  
  0  
#4
Options
Re:Airtel India Band 1 - Archer MR600
2022-06-15 03:31:12

  @Txiku 

 

Hi,since the smartphone is not using Band 1 any more with the same SIM card, it should be caused by Carrier, maybe the Airtel has updated their base station in your area recently, it is recommended to contact the carrier to confirm it.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#5
Options