Not seeing all the tabs on the UI
Hi there ! I have recently bought a Archer mr 600 and logged into the management app of the mr600 ! The problem is that there are missing tabs such as internet and firmware upgrade ! Any help to get the full UI on the management site ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If you want to have a full device management experience better use a web brwoser to access the device's WebGUI:
Launch a web browser and type in http://tplinkmodem.net or http://192.168.1.1 (that's the MR600 default LAN IP address).
- Copy Link
- Report Inappropriate Content
If you want to have a full device management experience better use a web brwoser to access the device's WebGUI:
Launch a web browser and type in http://tplinkmodem.net or http://192.168.1.1 (that's the MR600 default LAN IP address).
- Copy Link
- Report Inappropriate Content
@terziyski : I am logging into the specific WEB GUI of the device ! I am located in south africa . So im thinking that the specific settings are begin disabled ?
I woulf like the change bands and play around to get te best possible speeds ! But im currently facing this problem !
The downloade speed is 75mbs wich is good and upload 5mbs wich is low !
This is on 4g not 4g+
- Copy Link
- Report Inappropriate Content
When you login the router with a web browser, the tabs in question are here:
and here:
If you feel that some tabs in the web management interface are missing, post some screenshots of the issue.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 510
Replies: 3
Voters 0
No one has voted for it yet.