This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.C7 v5 firmware 1.1.4 issues
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I have 2 of the above. One used as an access point. I have just installed the latest firmware (1.1.4) and done a power cycle on the unit. Now when you click the 'Check for upgrade' button the response is 'No internet connection'.
Unit is connected and I can access the internet through it via wireless and wired. Looks like an error in the firmwre?
Thanks
This FW version (1.1.4) has been published for the US region since the beginning of November last year.
I presume it's not much different than the same FW release for the EU region.
Can you post your network settings for:
For security reasons cover/blur your public IP/MAC address.
LAN
DHCP Server
Finally post your main router:
DHCP server settings:
Internet settings:
Hi there,
Gave it a go, no change.
Not sure what changing the external DNS provider would do?
As I explained before the only change that was made to the setup was the update. As the update was done via the web portal on all 3 routers, NOT downloaded, the only variable is the update itself.
Both of the APs are connected to the internet as I can carry out a manual time setting and I can access the internet via wireless and wired connections on both of them.
Many thanks,
Sorry my bad.
This setting would have mattered if your AP routers were set to Smart IP(DHCP) and you have made an Address Reservation on the main router for them.
Sometimes to detect Internet TP-Link devices use Google DNSes - hence this experiment.
Try changing the Internet DNS settings on the main C7 here:
Advanced=>Network=>Internet - scroll down
Click on Advanced arrow, then select "Use the following DNS Addresses" radio button.
Type the DNS IPs from my previous post and then Save.
Test again to see if it makes any difference.