Deco M4 running on Firmware 1.5.2 Connection Problems
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I updated the latest firmware for my M4R (2.0) but after the update it keeps crashing my whole network, intermittently. Both wired and wireless connection stops working. Tried to downgrade back to the previous firmware but not allowed. Connection from ISP is stable.
Kindly advice any solution.
Thank you
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I might be having the same problem, what's your setup?
Mine's a Deco M4 (2.0) firware version 1.5.2 Build 20210916 Rel. 56193 connected as follows:
Modem --ethernet--> Deco (AP) --ethernet--> switch --> Office PCs
Both the wired and wireless connection goes down.
Disabling wifi on the modem makes no difference.
- Copy Link
- Report Inappropriate Content
Same here. Seems to be the same problem as being discussed in
https://community.tp-link.com/en/home/forum/topic/269448?page=1
But there seems to be no solution yet.
- Copy Link
- Report Inappropriate Content
Hi, thank you for the feedback.
Could you please help me check for more details:
Would any Deco turn red when the internet got disconnected?
May I know who is your internet service provider?
How often did this issue repeat?
And could you please install the beta firmware here to see whether it helped or not:
Wireless clients and Satellite Deco fail to connect to Main Deco under Spectrum / Starhub
- Copy Link
- Report Inappropriate Content
> May I know who is your internet service provider?
Starhub - Singapore
> How often did this issue repeat?
All the time after the 1.5.2 firmware upgrade
> And could you please install the beta firmware here to see whether it helped or not:
Wireless clients and Satellite Deco fail to connect to Main Deco under Spectrum / Starhub
Ok, will try it out over the weekend.
- Copy Link
- Report Inappropriate Content
> Would any Deco turn red when the internet got disconnected?
The main Deco is White while the Satelite Deco is Red.
- Copy Link
- Report Inappropriate Content
Thank you and please do remember to let me know whether the beta firmware works or not.
- Copy Link
- Report Inappropriate Content
TP-Link wrote
Thank you and please do remember to let me know whether the beta firmware works or not.
Loaded the beta firmware. It does not work.
The result is still the same. When the WAN is connected, the Deco becomes unresponsive, the CPU load is at 100% can the admin web page is not reachable. The mobile app is not able to connect to the network and the wireless clients are not able to login to the wifi.
- Copy Link
- Report Inappropriate Content
Would any Deco turn red when the internet got disconnected? - NO
May I know who is your internet service provider? - Melita Plc .. I am running some tests with ISP
How often did this issue repeat? - Intermittent but everyday.
my setup
Modem - Switch - Deco set as Access Points
Thomas
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 1288
Replies: 8
Voters 1
