I cannot connect to my port forwarded server
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi, as the title says I current am not able to connect to my server, the server uses port 19132; I used my public IP address and external port to connect to the server but no avail.
I've tried turning on DMZ and still I can't connect. I made sure that I am connecting using the public IP and Exposed Port of the server.
Here is the settings of my current config
Advanced/Network/Internet
NAT: Switched ON
Server PC Network Info
IP ADDRESS: 192.168.1.100
Port Used: 19132
FIREWALL: OFF
Advanced/Nat Forwarding/Virtual Server Configuration
Virtual Server Configuration
Service Type: Test Connection
External Port: 19132
Internal IP: 192.168.1.100
Internal Port: 19132
Protocol: TCP or UDP
FIREWALL: OFF
Make sure that your public IP address is displayed here:
If you public IP address is different than the IP address from your router's interface above, that means your ISP probably uses CG-NAT.
If that's the case, then that's the reason you can't access your server from Internet.