Home Network Community > Deco > No Network When Connecting Deco X20 With TL-SG105 Switch
< Deco

No Network When Connecting Deco X20 With TL-SG105 Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No Network When Connecting Deco X20 With TL-SG105 Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No Network When Connecting Deco X20 With TL-SG105 Switch
No Network When Connecting Deco X20 With TL-SG105 Switch
2021-12-09 05:36:42
Model: Deco X20  
Hardware Version: V7
Firmware Version: 1.1.3 Build 20211103

So I have a Tp-Link Deco X20 mesh WiFi router. Since it only has two Ethernet ports, so I bought a switch to support more wired connections. The switch I bought was Tp-Link TL-SG105, which is an unmanaged switch.

 

After the setup, now I have this connection order:

 

Modem -> Router -> Switch -> PC1, PC2, PC3...

 

But the problem I have is, when connecting to the switch, my PC can't obtain IP address. It seems like the DHCP on the router is not working at all. I'm getting "Unidentified network" with a 169.*.*.* IP address

.

My other iMac also cannot obtain IP when connecting to the switch.

 

When connecting the PC directly to the router, it works fine.

 

What could be the most possible cause of it? Is the switch malfunctioning? Or the Deco x20 needs some extra configuration in order to support an unmanaged switch?

 

Please help!

  1      
 
  1      
 
#1
Options
6 Reply
Re:No Network When Connecting Deco X20 With TL-SG105 Switch
2021-12-09 10:28:40

@JimmyDai 

Hi, Thank you very much for your feedback.

Based on the current connection map:

Modem -> Router -> Switch -> PC1, PC2, PC3...

Were you trying to say, PCs failed to get the IP address behind the switch but if any of them connected to the main Deco X20 directly, the IP is ok and the internet works fine?

If yes, any chance that you could move the switch  behind any of the satellite Deco X20 and check whether the same issue still existed, like:

Modem -> Router ~~~~<Wi-Fi>----satellite Deco X20----- Switch -> PC1, PC2, PC3

 And have you enabled IPTV/VLAN under Deco APP>More>Advanced>IPTV/VLAN?

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#2
Options
Re:No Network When Connecting Deco X20 With TL-SG105 Switch
2021-12-09 23:14:04

@TP-Link Yes that is exactly what happened to me.

 

I have tried to move the switch behind one of the satellite Deco X20. And it worked! My laptop was able to get IP address when connecting to the moved switch.

 

And nope, I have not enabled IPTV/VLAN.

 

What do all these mean? Is the main Deco X20 malfunctioning? 

 

Should I enable the IPTV/VLAN and try the switch behind the main Deco again?

  1  
  1  
#3
Options
Re:No Network When Connecting Deco X20 With TL-SG105 Switch
2021-12-10 01:04:15

@JimmyDai 

Hi, thank you for getting back to me.

It seems like something is wrong with the main Deco.

Could you please send me a private message about your TP-Link email ID and the MAC address of your main Deco?

By the way, who is your internet service provider? And what is the model number of your ISP cable modem?

Please also see the private message for further assistance.

Thank you again.

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#4
Options
Re:No Network When Connecting Deco X20 With TL-SG105 Switch
2021-12-10 02:26:53

@TP-Link I have sent you a private message regarding the information you need.

 

My ISP is wow cable https://www.wowway.com/. And my modem is Arris SB6190

  0  
  0  
#5
Options
Re:No Network When Connecting Deco X20 With TL-SG105 Switch
2021-12-11 01:09:59 - last edited 2021-12-11 05:19:33

Ok, the problem is now resolved after I switch the main deco with one satellite deco. The old main deco must be malfunctioning. And I also sent you a message about the remote session. Thank you so much!

 

Update:

 

Another problem occurred after that. My PC was only getting 100 Mbps speed from the switch. I tried changing the ports connected, and disable & enable the ethernet adapter. It sometimes even dropped to 10 Mbps. About 10 minutes after that, my PC stopped getting IP again. And the LED light near the port on the switch was off. 

 

I'm gonna return this switch and end my nightmare for all. No more ethernet connection. Just Wi-Fi for all devices.

  1  
  1  
#6
Options
Re:No Network When Connecting Deco X20 With TL-SG105 Switch
2021-12-13 02:08:00

@JimmyDai 

Hi, thank you very much for getting back to me.

And I got your message as well.

Currently, it is more like TL-SG105 is malfunctioning.

Later you could monitor the performance of the Deco kit for a while or test with another switch if possible, we would be happy to help you replace the Deco if necessary.

Thank you again for your time and patience.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#7
Options

Information

Helpful: 1

Views: 1581

Replies: 6

Related Articles
Connecting sonoff to the deco network (x20)
10707 2
No network when connecting Deco XE75 to a TL-SG105 switch
140 0
 Deco X20 + switch TL-SG105 on backhaul problem
382 1
Deco X20 NO Guest Network Isolation
6059 0
Deco X20 satellite disconnects and devices not connecting
528 0
xBox One connecting to Deco X20 but not actually working
2345 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.