Error 7500

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Error 7500

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Error 7500
Error 7500
2021-11-01 00:59:58 - last edited 2021-11-17 09:42:42
Model: Archer C3150  
Hardware Version: V2
Firmware Version:

Hello guys, 

I am trying to configure the WPA2 Enterprise settings on my archer c3150 router, using it as access point. when I try to save my configurations I get the 7500 error message. 

 

 

 

 

 

 

Error code: 7500
Wireless settings conflict. Please verify the settings, e.g. 1.WEP security or WPA/TKIP encryption is not supported with 11n-only wireless mode enabled; 2.WEP security or WPA/WPA2 Enterprise is not supported when WPS is enabled.
Clearly from the above settings: - for e.g. 1. I don't have 11n only enabled, 2. There is no obvious option that I can see to disable WPS.

 

Thanks, 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Error 7500-Solution
2021-11-01 22:04:56 - last edited 2021-11-17 09:42:42

@Azizesawi 

 

Sorry about that. The above procedure will disable the router PIN only.

What you can do is:

1.Switch the device back in wireles router mode.

2.Disable WPS feature from here:

 

 

3.Switch back the device in AP mode and test if that will resolve the issue.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#6
Options
4 Reply
Re:Error 7500
2021-11-01 11:51:59

@Azizesawi 

 

Have you tried to disable WPS from here:

 

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Error 7500
2021-11-01 21:30:05

Hello @terziyski , 

Yes, I have disabled it from the page you showed in the reply, but nothing has happened. Sorry!

 

Any suggestions??

 

Thanks, 

  0  
  0  
#3
Options
Re:Error 7500-Solution
2021-11-01 22:04:56 - last edited 2021-11-17 09:42:42

@Azizesawi 

 

Sorry about that. The above procedure will disable the router PIN only.

What you can do is:

1.Switch the device back in wireles router mode.

2.Disable WPS feature from here:

 

 

3.Switch back the device in AP mode and test if that will resolve the issue.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#6
Options
Re:Error 7500
2021-11-13 08:48:20
It works thanks a lot mate. Regards
  0  
  0  
#7
Options