Solution No connection in 4g after reboot
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
After simply turning it off and on again, the modem no longer connects to any 4g network (before turning it off everything was working correctly) If I try to select the solo4g mode it gives me an error I am attaching some screenshots that maybe can help.
I have already tried to reset it and restart it.
Error if i try select only 4g.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
This is quite strange.
Please refer to this link for more suggestions:
Tether APP fails to manage device remotely?
If not working, Could you please send the following information to support.forum@tp-link.com:
1. A screenshot on the Tether app when you log in remotely.
2. The system log on the Archer MR600 via web UI(Advanced>system tools>system log)
3. A picture of the advanced>status page.
- Copy Link
- Report Inappropriate Content
Buongiorno,
ho lo stesso identico problema anche io sul router dopo aver effettuato il reboot. Mi si connette solo alla rete 3G e quando provo ad impostare "4G" mostra l'errore "codice errore: 1" e se imposto "4G preferita" e poi imposto manualmente la band mostra l'errore "codice errore: 89534" . Il tipo di rete è sempre WCDMA.
Al momento la mia versione è Firmware è 1.4.0 0.9.1 v0001.0 Build 210727 Rel.33453n
Modello: Archer MR600 v2 00000002
Come posso fare per risolvere il problema?
Grazie
- Copy Link
- Report Inappropriate Content
Salve, vi informo che dopo l'aggiornamento firmware, non so se è per questo, l'App da remoto si collegata tranquillamente senza problemi.
saluti e grazie.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, the beta firmware is on the first page, and please try to install the pre-release 1.5.0 firmware.
- Copy Link
- Report Inappropriate Content
Hi, After you download firmware 1.5.0 on the computer, you could disconnect the hotspot now, and connect to MR600 since the local firmware upgrade does not require internet service.
- Copy Link
- Report Inappropriate Content
@TP-Link Thanks. Solved the problems. 1.5.0 feel smoth and also its conecting 4G+ so fast .
But is changed admin panel address to 192.168.1.1
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
I have tested on my side and it is ok to update the 1.5.0 build 20210914 from 20210727.
Since you still used the beta link even though the bin file is the same as the official link, so I wonder whether you could detect the latest 1.5.0 firmware via “Online Upgrade”.
And if you updated the firmware via Wi-Fi, could you please also test the Ethernet connection as well?
- Copy Link
- Report Inappropriate Content
I see in your screenshot it is version V1
mine is V2
tried on ethernet for the firmware upgrade and it is the same.
I was not able to get internet on the router itself so if you have any trick to get internet without sim enabled. I have now "please insert your sim card" so the router does not recognize anymore...
So I was not able to try the firmware update directly from the mr600 interface
can you try the upgrade on V2? can you post anlother link to the firmware. It is really disapointed I have to spend so many time to troubleshoot. I hard reseted but still the same. and the sim is on on another tplink MR6400 ...
thanks for the help
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 15498
Replies: 64
Voters 3
