PPPoE connection getting disconnected and reconnected automatically

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

PPPoE connection getting disconnected and reconnected automatically

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
PPPoE connection getting disconnected and reconnected automatically
PPPoE connection getting disconnected and reconnected automatically
2021-10-12 12:38:51
Model: Archer C24  
Hardware Version: V1
Firmware Version: 1.4.3 Build 201022 Rel.55840n(5553)

0days, 06:00:35, [ppp][LCP]RX TERMINATION_REQUEST

0days, 06:00:35, [ppp][LCP]TX TERMINATION_ACK

0days, 12:04:29, [ppp][LCP]RX TERMINATION_REQUEST

0days, 12:04:29, [ppp][LCP]TX TERMINATION_ACK

0days, 13:14:10, [wan]Wan ethernet port plug off.

0days, 13:14:10, [ppp][LCP]TX TERMINATION_REQUEST

 

As you have look into the full log. You'll see the first 4 lines of log appear after every 6 hours if not the connection gets disturbed by the last two lines. Can anyone have a look and say what is causing the issue? Sometimes it's really frustrating when you lose the connection in the middle of important task.

File:
syslogArcherC24.txtDownload
  0      
  0      
#1
Options
1 Reply
Re:PPPoE connection getting disconnected and reconnected automatically
2021-10-12 20:20:28

@Calvin_K 

 

If you have an ISP modem before the C24 router replace the cable between them to test if that will improve things.

If you don't have an ISP modem then call your ISP and explain the issue, they may trace a possible connectivity issue.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  4  
  4  
#2
Options