Can´t re-install TP-Link firmware. MR200 v4 bricked?
Hi
I first installed Archer MR200(EU)_V4_210201 and then I tried to install OpenWrt. But the OpenWrt firmware was not compatible with the v4.
Then I re-install Archer MR200(EU)_V4_210201 again, via TFTP, the router reboots and starts to uncompress the kernel. But then I get this error:
Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover
What can I do ro recover my MR200v4?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, Did you try the factory reset the modem?
And currently, our LTE gateway routers do not support firmware recovery via TFTP.
- Copy Link
- Report Inappropriate Content
I have TP Link Archer 750 Router (MR200 with LTE , V5), there was an interruption during the firmware upgrade.
From then it never turns on, the power indicator keep flashing.
From you post I noticed the LTE model doesn't have TFTP, then how to resolved this issue? How can I reinstall the frimware?
- Copy Link
- Report Inappropriate Content
In my case the TFTP "function" was OK.
I create the tp_recovery.bin file with:
dd bs=512 skip=1 count=16000 if=LTE_GATEWAY_1.19.0_0.9.1_up_boot(210201)_all_2021-02-01_19.17.11.bin of=tp_recovery.bin
and loaded it via TFTP. TFTP server IP: 192.168.0.255 /24
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2203
Replies: 5
Voters 0
No one has voted for it yet.