TL-MR3020 - Modem ZTE K3570-Z is identifed but does not connect
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-MR3020 - Modem ZTE K3570-Z is identifed but does not connect
Region : Austria
Model : TL-MR3020
Hardware Version : V1
Firmware Version : newest one
ISP : Mobilkom A1
I have got my 3G Router 3 days ago and can not get it to work with Modem ZTE K3570-Z. I tried the newest FW Version and the previous one to no avail.
The modem is identified but will not connect.
The modem works on various notebooks with different SIM cards in different networks (Vodafone Turkey, Mobilkom Austria, Orange Austria, Yesss Austria) and countries.
So I suspect it is not the modem but the router. Although the modem is listed as compatible by TP-LINK.
A modem borrowed from a friend (ZTE MF 626) works on the 3G router with all the SIM cards I have.
The logfile below contains a message saying check APN and dial number. As my tests showed the dial number and APN are correct otherwise the borrowed modem would not work.
Here is an excerpt of the logfile:
Jul 11 19:39:01 3G/4G NOTICE handle_card start
Jul 11 19:39:01 3G/4G INFO LTE MODEM = 0, status = 1, targetVendorID = 0x0, targetProductID = 0x0
Jul 11 19:39:06 3G/4G INFO Before Mode switch VendorID = 0x19d2, ProductID = 0x1007
Jul 11 19:39:26 3G/4G NOTICE /tmp/3G/19d2_1007_0
Jul 11 19:39:53 3G/4G INFO Main interface_index[0] = 1
Jul 11 19:39:53 3G/4G INFO Vice interface_index[1] = 2
Jul 11 19:39:53 3G/4G INFO Vice interface_index[2] = 3
Jul 11 19:39:54 3G/4G NOTICE after switch modem vid is 0x19d2 pid is 0x1008
Jul 11 19:39:54 3G/4G INFO LTE MODEM = 0, status = 2, targetVendorID = 0x19d2, targetProductID = 0x1008
Jul 11 19:39:55 3G/4G INFO USB modem is ready
Jul 11 19:41:07 3G/4G NOTICE +CPIN: READY
Jul 11 19:41:07 3G/4G NOTICE modemUnlockSim 1523: Unlock PIN 1 times.
Jul 11 19:41:17 PPP NOTICE Standard authentication.
Jul 11 19:41:17 3G/4G NOTICE 3G/4G start connecting...
Jul 11 19:41:17 3G/4G INFO Run 3G dial cmd: pppd 3g 1 /dev/ttyUSB1 115200 connect "chat -s -v -f /etc/ppp/c
Jul 11 19:41:18 PPP INFO pppd start
Jul 11 19:41:45 PPP NOTICE Standard authentication.
Jul 11 19:41:45 3G/4G NOTICE 3G/4G start connecting...
Jul 11 19:41:45 3G/4G INFO Run 3G dial cmd: pppd 3g 1 /dev/ttyUSB2 115200 connect "chat -s -v -f /etc/ppp/c
Jul 11 19:41:45 PPP INFO pppd start
Jul 11 19:42:14 PPP NOTICE Standard authentication.
Jul 11 19:42:14 3G/4G NOTICE 3G/4G start connecting...
Jul 11 19:42:14 3G/4G INFO Run 3G dial cmd: pppd 3g 1 /dev/ttyUSB3 115200 connect "chat -s -v -f /etc/ppp/c
Jul 11 19:42:14 PPP INFO pppd start
Jul 11 19:43:10 3G/4G WARNING 3G Modem connecting error, please check the dial number and APN.
Jul 11 19:43:10 3G/4G INFO sw3GMobileCmdReq 349 mobileFormatCmd error
Any help highly appreciated
THX
BR
Hans
Model : TL-MR3020
Hardware Version : V1
Firmware Version : newest one
ISP : Mobilkom A1
I have got my 3G Router 3 days ago and can not get it to work with Modem ZTE K3570-Z. I tried the newest FW Version and the previous one to no avail.
The modem is identified but will not connect.
The modem works on various notebooks with different SIM cards in different networks (Vodafone Turkey, Mobilkom Austria, Orange Austria, Yesss Austria) and countries.
So I suspect it is not the modem but the router. Although the modem is listed as compatible by TP-LINK.
A modem borrowed from a friend (ZTE MF 626) works on the 3G router with all the SIM cards I have.
The logfile below contains a message saying check APN and dial number. As my tests showed the dial number and APN are correct otherwise the borrowed modem would not work.
Here is an excerpt of the logfile:
Jul 11 19:39:01 3G/4G NOTICE handle_card start
Jul 11 19:39:01 3G/4G INFO LTE MODEM = 0, status = 1, targetVendorID = 0x0, targetProductID = 0x0
Jul 11 19:39:06 3G/4G INFO Before Mode switch VendorID = 0x19d2, ProductID = 0x1007
Jul 11 19:39:26 3G/4G NOTICE /tmp/3G/19d2_1007_0
Jul 11 19:39:53 3G/4G INFO Main interface_index[0] = 1
Jul 11 19:39:53 3G/4G INFO Vice interface_index[1] = 2
Jul 11 19:39:53 3G/4G INFO Vice interface_index[2] = 3
Jul 11 19:39:54 3G/4G NOTICE after switch modem vid is 0x19d2 pid is 0x1008
Jul 11 19:39:54 3G/4G INFO LTE MODEM = 0, status = 2, targetVendorID = 0x19d2, targetProductID = 0x1008
Jul 11 19:39:55 3G/4G INFO USB modem is ready
Jul 11 19:41:07 3G/4G NOTICE +CPIN: READY
Jul 11 19:41:07 3G/4G NOTICE modemUnlockSim 1523: Unlock PIN 1 times.
Jul 11 19:41:17 PPP NOTICE Standard authentication.
Jul 11 19:41:17 3G/4G NOTICE 3G/4G start connecting...
Jul 11 19:41:17 3G/4G INFO Run 3G dial cmd: pppd 3g 1 /dev/ttyUSB1 115200 connect "chat -s -v -f /etc/ppp/c
Jul 11 19:41:18 PPP INFO pppd start
Jul 11 19:41:45 PPP NOTICE Standard authentication.
Jul 11 19:41:45 3G/4G NOTICE 3G/4G start connecting...
Jul 11 19:41:45 3G/4G INFO Run 3G dial cmd: pppd 3g 1 /dev/ttyUSB2 115200 connect "chat -s -v -f /etc/ppp/c
Jul 11 19:41:45 PPP INFO pppd start
Jul 11 19:42:14 PPP NOTICE Standard authentication.
Jul 11 19:42:14 3G/4G NOTICE 3G/4G start connecting...
Jul 11 19:42:14 3G/4G INFO Run 3G dial cmd: pppd 3g 1 /dev/ttyUSB3 115200 connect "chat -s -v -f /etc/ppp/c
Jul 11 19:42:14 PPP INFO pppd start
Jul 11 19:43:10 3G/4G WARNING 3G Modem connecting error, please check the dial number and APN.
Jul 11 19:43:10 3G/4G INFO sw3GMobileCmdReq 349 mobileFormatCmd error
Any help highly appreciated
THX
BR
Hans