ZTE AC-2737 not connecting / supported by TL-MR3040 Portable 3G/3.75G Router (

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

ZTE AC-2737 not connecting / supported by TL-MR3040 Portable 3G/3.75G Router (

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
20 Reply
Successfully Connected TL-MR3040 with ZTE AC2737 - Reliance Netconnect+
2013-07-15 00:16:11
Successfully Connected TL-MR3040
*************************************
Using H-Ver = MR3040 v1 00000000 (BETA) : S-Ver = 3.15.1 Build 130307 Rel.50421n (BETA)

ZTE AC2737 - Reliance Netconnect+

Dial Number: #777
APN: - blank
Username: datacard 10digit number
Password: datacard 10digit number





####################################################################
# TL-MR3040 System Log
# Time = 2013-07-14 21:31:08 93s
# H-Ver = MR3040 v1 00000000 (BETA) : S-Ver = 3.15.1 Build 130307 Rel.50421n (BETA)
# L = 192.168.0.1 : M = 255.255.255.0
# 3G : 3G = 115.241.114.196 : M = 255.255.255.255 : G = 115.241.114.196
####################################################################

1st day 00:00:07 OTHER INFO System started
1st day 00:00:18 DHCP NOTICE DHCP server started
1st day 00:00:18 SECURITY INFO PPTP Passthrough enabled
1st day 00:00:18 SECURITY INFO L2TP Passthrough enabled
1st day 00:00:18 SECURITY INFO IPSEC Passthrough enabled
1st day 00:00:18 SECURITY INFO FTP ALG enabled
1st day 00:00:18 SECURITY INFO TFTP ALG enabled
1st day 00:00:18 SECURITY INFO H323 ALG enabled
1st day 00:00:18 SECURITY INFO RTSP ALG enabled
1st day 00:00:31 3G/4G NOTICE handle_card start
1st day 00:00:31 3G/4G INFO LTE MODEM = 0, status = 1, targetVendorID = 0x0, targetProductID = 0x0
1st day 00:00:36 3G/4G INFO Before Mode switch VendorID = 0x19d2, ProductID = 0xfff5
1st day 00:00:36 3G/4G INFO Memory command is matched.
1st day 00:00:53 DHCP NOTICE DHCPS:Recv REQUEST from 00:1F:3B:68:A3:5F
1st day 00:00:54 3G/4G NOTICE after switch modem vid is 0x19d2 pid is 0xfff1
1st day 00:00:54 3G/4G INFO LTE MODEM = 0, status = 2, targetVendorID = 0x19d2, targetProductID = 0xfff1
1st day 00:00:54 DHCP NOTICE DHCPS:Send ACK to 192.168.0.100
1st day 00:00:54 3G/4G INFO USB modem is ready
1st day 00:00:58 DHCP NOTICE DHCPS:Recv INFORM from 00:1F:3B:68:A3:5F
1st day 00:01:03 PPP NOTICE Standard authentication.
1st day 00:01:03 3G/4G NOTICE 3G/4G start connecting...
1st day 00:01:03 3G/4G INFO Run 3G dial cmd: pppd 3g 1 /dev/ttyUSB0 115200 connect "chat -s -v -f /etc/ppp/c
1st day 00:01:03 PPP INFO pppd start
1st day 00:01:05 PPP INFO rcvd [LCP Req asyncmap=0x0 auth=pap magic=0x9dc2f25f pcomp accomp]
1st day 00:01:05 PPP INFO sent [LCP Req mru=1480 asyncmap=0x0 magic=0x8c74898e]
1st day 00:01:05 PPP INFO sent [LCP Rej pcomp accomp]
1st day 00:01:05 PPP INFO rcvd [LCP Ack mru=1480 asyncmap=0x0 magic=0x8c74898e]
1st day 00:01:05 PPP INFO rcvd [LCP Req asyncmap=0x0 auth=pap magic=0x9dc2f25f]
1st day 00:01:05 PPP INFO sent [LCP Ack asyncmap=0x0 auth=pap magic=0x9dc2f25f]
1st day 00:01:05 PPP INFO sent [LCP EchoReq magic=0x8c74898e]
1st day 00:01:05 PPP INFO sent [PAP AuthReq user="9380042070" password=(hidden)]
1st day 00:01:05 PPP INFO sent [LCP code=0xc]
1st day 00:01:05 PPP INFO rcvd [LCP EchoRep magic=0x9dc2f25f]
1st day 00:01:06 PPP INFO rcvd [PAP AuthAck ""]
1st day 00:01:06 PPP INFO sent [IPCP Req compress VJ 0f 01 addr=0.0.0.0 dns1=0.0.0.0 dns3=0.0.0.0]
1st day 00:01:06 PPP INFO rcvd [IPCP Req addr=220.224.141.145]
1st day 00:01:06 PPP INFO sent [IPCP Ack addr=220.224.141.145]
1st day 00:01:06 PPP INFO rcvd [IPCP Rej compress VJ 0f 01]
1st day 00:01:06 PPP INFO sent [IPCP Req addr=0.0.0.0 dns1=0.0.0.0 dns3=0.0.0.0]
1st day 00:01:06 PPP INFO rcvd [IPCP Nak addr=115.241.114.196 dns1=220.226.6.104 dns3=220.226.100.40]
1st day 00:01:06 PPP INFO sent [IPCP Req addr=115.241.114.196 dns1=220.226.6.104 dns3=220.226.100.40]
1st day 00:01:06 PPP INFO rcvd [IPCP Ack addr=115.241.114.196 dns1=220.226.6.104 dns3=220.226.100.40]
1st day 00:01:07 3G/4G NOTICE 3G/4G connected
1st day 00:01:07 3G/4G INFO Modem information is updated
  0  
  0  
#12
Options
Re:ZTE AC-2737 not connecting / supported by TL-MR3040 Portable 3G/3.75G Router (
2013-07-25 01:45:31
I recently brought a new TP-LINK TL-MR3040 3G/4G Router. I have a Reliance Netconnect+ ZTE Data Card Model AC2737.

I'm trying to install the same but could not connect the same. On the IP Address provided when I connected by my Laptop its shown as Limited Connectivity in the tray manager.

Could neone please help to how can I connect the same. Since this is Reliance EVDO Data Card, should i set it to 3G/4G mode or WSIP mode on the router.

Thanks and waiting to hear soon.
  0  
  0  
#13
Options
Re:ZTE AC-2737 not connecting / supported by TL-MR3040 Portable 3G/3.75G Router (
2013-07-25 21:53:14
Eureka.....!!!!! Successfully Connected....

Thanks the mail support from the TP-Link Technical Support.

The device Firmware needs to be upgraded in order to work with ZTE AC2737....

Upgraded Current Firmware Version 3.14.4 Build 121017 Rel.xxxx (sorry friends, don't remember the release number) to 3.15.2 Build 130327 Rel.14730n (BETA). New Firmware version was provided in the mail response from the technical support team.

Anyone requires the new firmware please do let me know.
  0  
  0  
#14
Options
Re:ZTE AC-2737 not connecting / supported by TL-MR3040 Portable 3G/3.75G Router (
2013-07-29 19:33:00
I am also facing the same issue with TP-LINK TL-MR3040 3G/4G Router. with Reliance Netconnect+ ZTE Data Card Model AC2737. I need the new firmare to support ZTE Data Card Model AC2737, Thanks
  0  
  0  
#15
Options
Re:ZTE AC-2737 not connecting / supported by TL-MR3040 Portable 3G/3.75G Router (
2013-08-09 14:50:51
Please provide me the firmware - 3.15.2 Build 130327 Rel.14730n (BETA).
My router is MR3040 V2,
Thanks.
  0  
  0  
#16
Options
Re:ZTE AC-2737 not connecting / supported by TL-MR3040 Portable 3G/3.75G Router (
2013-08-09 20:43:06
Hi cool_adonis, I need the firmware version 3.14.4. please provide me.
  0  
  0  
#17
Options
Request for latest firmware
2013-08-20 11:58:53
Hello Adonis,

Can you please send me latest firmware you have received for 3040 to my email address sanglinx@hotmail.com with steps for configuration?.

Thanks
Sangram

cool_adonis wrote

Eureka.....!!!!! Successfully Connected....

Thanks the mail support from the TP-Link Technical Support.

The device Firmware needs to be upgraded in order to work with ZTE AC2737....

Upgraded Current Firmware Version 3.14.4 Build 121017 Rel.xxxx (sorry friends, don't remember the release number) to 3.15.2 Build 130327 Rel.14730n (BETA). New Firmware version was provided in the mail response from the technical support team.

Anyone requires the new firmware please do let me know.
  0  
  0  
#18
Options
Re:ZTE AC-2737 not connecting / supported by TL-MR3040 Portable 3G/3.75G Router (
2013-08-29 14:18:04
Hi Friends,

Unable to upload the file. U can mail me at prasadshailesh1980@gmail.com and I shall share u the same over mail.

Sorry friends, the process on the TP-Link forum to upload is very pathetic, hence couldn't do so.
  0  
  0  
#19
Options
firmware file
2013-10-07 21:40:15
Here is the firmware file so that people facing the same issue can hopefully resolve it quickly.

mr3040v2_en_3_15_2_up(130327).zip (5.1 MB)
https://mega.co.nz/#!XoYzxBzI!cZ31XnUuJ5DW3O7xyoKLkGSDS7EDyJro1qV9sfyTPho
  0  
  0  
#20
Options
firmware file
2013-10-07 21:43:57
The firmware file can be downloaded at the location below, note this is only valid for Version 2 of the MR3040 router.

mr3040v2_en_3_15_2_up(130327).zip (5.1 MB)
https://mega.co.nz/#!XoYzxBzI!cZ31XnUuJ5DW3O7xyoKLkGSDS7EDyJro1qV9sfyTPho
  0  
  0  
#21
Options