Cant port forward

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cant port forward

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cant port forward
Cant port forward
2021-09-13 20:46:38
Model: Archer C54  
Hardware Version: V1
Firmware Version: 1.4.5. build 201019 rel.57444n (4555)

Cant port forward...  Is there a solution?

  0      
  0      
#1
Options
5 Reply
Re:Cant port forward
2021-09-13 21:20:34 - last edited 2021-09-13 21:49:51

@Bobby86 

 

Which port are you trying to forward ?

Disable UPnP:

 

 

reboot the C54 and try again.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Cant port forward
2021-09-13 21:34:42

@terziyski, port 44158, tried to disable UPnP but it gives the same error.

  0  
  0  
#3
Options
Re:Cant port forward
2021-09-13 21:56:44

@Bobby86 

 

While UPnP enabled you can observe the UPnP requests from your devices here:

 

 

Reboot the device after disabling UPnP to be sure that there's no device on your network trying to open this port via UPnP.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Cant port forward
2021-09-19 15:43:06

@terziyski 
unfortunately, but still same warning pops out...
any ideas?

  0  
  0  
#5
Options
Re:Cant port forward
2021-09-19 16:17:03 - last edited 2021-09-19 16:28:13

@Bobby86 

 

If you haven't configured any port-forwarding rule or DMZ, and have UPnP disabled, I don't have other ideas.

If that's the case, then you should contact the support to be advised further.

 

One more thing you could try - update the FW to the latest release and try to open that port again.

If you're with the EU region FW, then download from here.

Here's how to determine that - usually the bottom sticker.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options