Solution VR300 | Errors (pkts) increases after ~ 12 hours of usage. Download bitrate drops down dramatically
Hello,
have already post about this problem in this thread, but probably is better to create a new one since we are talking about a different model.
Problem is that after ~ 12 hour of work the Errors (pkts) count moves from zero and goes wild (after this night was around ~1200000 ).
The speed of download bitrate dramatically start to decrease as well.
The only 2 found solution is either to restart the modem or unplug and replug the vdsl cable to reset internet connection.
after a reboot the situation is this one [ full performance in pagespeed (40 mbps down, 7.7 mbps up) ]
After ~12 hours the errors start to spawn and the download rate decreased to less than 4 mbps download (!!), upload value is the same.
Other Notes:
Am not using any telephone nor dsl filter, just the vdsl cable connect directly to the router.
The problems happens also for my ethernet connected Desktop PC (errors pkts + download speed drammaticaly decreased)... this is definitely not only a WiFi issue.
Seems also that this problem happens also for different model of tp-link modem router eg:
https://community.tp-link.com/en/home/forum/topic/243294
https://community.tp-link.com/en/home/forum/topic/263338
https://community.tp-link.com/en/home/forum/topic/271298
https://community.tp-link.com/en/home/forum/topic/209588
https://community.tp-link.com/en/home/forum/topic/240008
In none of these thread there is a solution.
Can anyone help me?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@RyomaFV same here with my VR300 any help yet?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link نفس المشكل
- Copy Link
- Report Inappropriate Content
Thank you and please refer to the private message and install the firmware here.
Please let me know whether it helped or not.
- Copy Link
- Report Inappropriate Content
Hello,
i have the same
problems with my TpLink Archer Vr1200v.
1. The model number as well as the hardware and firmware version of the modem--> Archer Vr1200v firmware 1.0.0 0.8.0 v600e.0 Build 200714 Rel.2239n Version Hardware:Archer VR1200v v1 00000001
2. The internet service provider and the specific DSLAM information which you could get from ISP--> ISP: IT-Gate
DSLAM it should be Broadcom: Version 12.0.22
3. A picture of the DSL info with a huge upload error screenshot.-- See below
- Copy Link
- Report Inappropriate Content
Hello,
i have the same
problems with my TpLink Archer Vr1200v.
1. The model number as well as the hardware and firmware version of the modem--> Archer Vr1200v firmware 1.0.0 0.8.0 v600e.0 Build 200714 Rel.2239n Version Hardware:Archer VR1200v v1 00000001
2. The internet service provider and the specific DSLAM information which you could get from ISP--> ISP: IT-Gate
DSLAM it should be Broadcom: Version 12.0.22
3. A picture of the DSL info with a huge upload error screenshot.-- See below
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
hi, there is a beta firmware for VR400 V3 as well.
Please refer to the private message and let me know whether it is working or not.
Thank you.
marcomayHi, there is no fixed firmware for VR2100V.
Could you please send an email to support.forum@tp-link.com for further assistance?
Please leave me a message if you sent the email.
thank you very much.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 30050
Replies: 127