Configuration Guide DC Connector barrel size
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello all.
Does anyone happen to know, or to quickly measure the dc jack barrel size?
Mine is elsewhere and I want to wall mount it, and the cable needs to be extended.
I am guessing its a 5.5mm barrel, but I don't know if its its a 2.1mm or 2.5 mm inner pin
Tks!!
Hi, Thank you very much for your kind reply.
Here is some information about DC power cord for your reference:
Note: All the following information is only for reference and some models, such as TL-POE200 & POE150S might have a slight difference.
If you got more accurate information, It would be highly appreciated if you could reply below and we could update the information accordingly.
| DC power supply output |
Inner diameter |
External diameter |
length |
| 3.3V |
1.35 |
3.5 |
9.5 |
| 5V/0.6A; 5V/1A |
1.35 |
3.5 |
9 |
| 5V/2A |
1.7 |
4.75 |
8.5 |
| 9V;12V---MR600 v1 |
2.1 |
5.5 |
9 |
| 48V/0.5A |
1.7 |
4.75 |
8.5 |
| 48V/1.25A |
2.1 |
5.5 |
9 |
Hi, Thank you very much for your kind reply.
Here is some information about DC power cord for your reference:
Note: All the following information is only for reference and some models, such as TL-POE200 & POE150S might have a slight difference.
If you got more accurate information, It would be highly appreciated if you could reply below and we could update the information accordingly.
| DC power supply output |
Inner diameter |
External diameter |
length |
| 3.3V |
1.35 |
3.5 |
9.5 |
| 5V/0.6A; 5V/1A |
1.35 |
3.5 |
9 |
| 5V/2A |
1.7 |
4.75 |
8.5 |
| 9V;12V---MR600 v1 |
2.1 |
5.5 |
9 |
| 48V/0.5A |
1.7 |
4.75 |
8.5 |
| 48V/1.25A |
2.1 |
5.5 |
9 |