Would this home setup work with the Deco X68?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I bought a new house and the first thing I want to do is run cat 6 and add the ethernet wall jacks to each room
I was thiking something like this? I might do an 8 port and also run to kitchen, living room, and garage.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
That should work OK for you but few things you need to do
1. Change the Deco from Router to AP mode so it uses the Wired Backhaul and not the wireless
2. Connect the first switch to your router, then the First Deco into the first switch.
3. Disable any WiFi on the router as it wont roam with Deco
- Copy Link
- Report Inappropriate Content
That should work OK for you but few things you need to do
1. Change the Deco from Router to AP mode so it uses the Wired Backhaul and not the wireless
2. Connect the first switch to your router, then the First Deco into the first switch.
3. Disable any WiFi on the router as it wont roam with Deco
- Copy Link
- Report Inappropriate Content
Isn't the first deco my router? I thought these act as both so I wasn't planning on even using a router. Going from modem straight to first deco and then switch
- Copy Link
- Report Inappropriate Content
Deco is indeed a router, but sometimes ISPs will also provide routers and this is what I was referring too.
If your ISP has a router, rather than adding the Deco as another router.. you can switch it to Access Point Mode and that's sometimes a good idea.. however in your latest post you mentioned a modem so therefore Deco in router mode is what you are after
- Copy Link
- Report Inappropriate Content
Yes, if your ISP only provided a modem, then your previous setup is perfect.
While if your ISP provided a modem-router combo, Philbert’s suggestion about access point is worth a try.
- Copy Link
- Report Inappropriate Content
@TP-Link TY
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1059
Replies: 5
Voters 0
No one has voted for it yet.