Accepted [Wi-Fi Routers] AP Mode supports Onemesh
Updated on Sep 2, 2024:
We're thrilled to announce the rollout of new official firmware rolling out for multiple routers, including the BE, AX, and AC series, which introduces EasyMesh in AP Mode as a Controller. Check the following thread for a list of the models that support this feature:
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
There are some cases that customers have their main modem router acting as the gateway and DHCP server in the network, and thus they need to change the TP-Link router to work as an Access Point to avoid the double-NAT issue. However, some of them still request the Onemesh routers (TP-Link OneMesh Devices) to support building up an Onemesh system with the Onemesh extenders when working in Access Point mode.
Before requesting that, we hope you could have a brief understanding about the difference between Router mode and Access Mode by referring to the article below, some advanced features would not be supported in Access Point mode, which is also the case for Onemesh:
If you do purchase an Onemesh router and extender already, you will need to configure it in Router mode to build up the Onemesh system. For better performance, it is suggested to check with your modem router support that if you can turn it into bridge mode or pure modem, then configure the TP-Link router as the main router.
However, we still open our ears for the market and customers here that how many of you request the Onemesh router supporting Onemesh in AP mode, and all of your opinions will be passed to the relevant team to be considered.
Press the like button and/or leave your comments and opinions if you also request the same. You can also exchange or share your opinions on this feature here. Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
thank you for confirmation, I was afraid about it. Yes, extension of my NW is working, but you know with some limitation.
Do you know which TP-LInk model support mesh function in AP mode? If any?
thank you for you reply
- Copy Link
- Report Inappropriate Content
Yes, we do have some models get the support for EasyMesh in AP Mode, such as Archer AX55 V1 1.3.2 and newer versions, Archer C80 V2.20/V2.26 1.14.0 and newer versions, Archer A8 V2.20/V2.26 1.14.0 and newer versions, Archer C6 V4 1.14.0 and newer versions, Archer C86 V1 1.14.0 and newer versions.
You may check the following threads to get the updated information about the specific model and firmware:
New Firmware for Archer AX55 V1 Supports DoH&DoT, ECO Mode, EasyMesh in AP Mode and More
Pre-release Firmware for Archer C80/A8/C6/C86 Brings a Host of New Features and Optimizations
- Copy Link
- Report Inappropriate Content
How about the Archer AX6000? Will we ever see easy mesh as an option in AP mode for this device?
- Copy Link
- Report Inappropriate Content
@EldonLi All my TP-Link routers and onemesh extenders are now gathering dust thanks to my AX6000 not supporting Onemesh in AP mode, very sad, no more tp-link for me
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z Hello, will the Archer AX20 router support OneMesh in AP mode? There is a great lack of such functionality.
- Copy Link
- Report Inappropriate Content
gmarinos wrote
I am desperate to improve my OneMesh (main router is TP-Link ARCHER AXE75 & extender is RE700X). As the distance between the main router and extender in large I am hoping that a wired ethernet connection would help
@gmarinos Unfortunately, RE700 does not yet support EasyMesh Ethernet backhaul, so it cannot connect to the AXE75 using an Ethernet cable to build up an EasyMesh network.
- Copy Link
- Report Inappropriate Content
Slava_Bogo wrote
@Kevin_Z Hello, will the Archer AX20 router support OneMesh in AP mode? There is a great lack of such functionality.
@Slava_Bogo I apologize for not being able to provide a definitive answer until a new firmware update is released to add these features.
You may keep an eye on the new firmware updates for your device. It's also suggested to subscribe to my below thread to get a notice. I will update the list once new models support this feature:
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 197
Views: 34996
Replies: 104