Copy tftp from startup-config

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Votes

Copy tftp from startup-config

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

szabadi

2021-05-28 07:39:48 - last edited 2021-05-28 09:27:30

Posts: 13

Helpful: 2

Solutions: 2

Stories: 0

Registered: 2021-03-08

Copy tftp from startup-config

2021-05-28 07:39:48 - last edited 2021-05-28 09:27:30

Model: T2600G-18TS(TL-SG3216)

Hardware Version: V1

Firmware Version: 1.0.0 Build 20170105 Rel.55239(s)

I have a problem copying config from tftp to startup-config with the device above.

I can copy startup-config to tftp server successfully, but when i try to copy config to tftp, I got the next message:

TEST-SWITCH#copy tftp startup-config ip-address 192.168.0.200 filename test.cfg

Start to load user config file......
Failed to load user config file!
------------------------------------^
Error: Invalid parameter.

Backwards:

TEST-SWITCH#copy startup-config tftp ip-address 192.168.0.200 filename backup_test.cfg
Start to backup user config file......
Backup user config file OK.

I tried with different extensions without any success.

Can anybody help me with this issue?

1 Accepted Solution

szabadi

LV1

2021-05-28 09:27:23 - last edited 2021-05-28 09:29:31

Posts: 13

Helpful: 2

Solutions: 2

Stories: 0

Registered: 2021-03-08

Re:Copy tftp from startup-config-Solution

2021-05-28 09:27:23 - last edited 2021-05-28 09:29:31

I figured out that if the file test.cfg is in the tftp server, and when I copy the file from tftp server, I don't write the extension next to the file.
This way the copy action is successful.

In tftp server:
test.cfg

in cli:
tftp startup-config ip-address 192.168.0.200 filename test

Copy tftp from startup-config

Copy tftp from startup-config

Information

Voters 0

Tags