Home

Forums

Stories

Knowledge Base

Home Network Community > 5G/4G Wi-Fi Routers/MiFi > Archer MR200 does not forward ports to local server

< 5G/4G Wi-Fi Routers/MiFi

Archer MR200 does not forward ports to local server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR200 does not forward ports to local server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

jmss

2021-05-03 20:43:29 - last edited 2021-05-10 20:36:16

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-05-03

Archer MR200 does not forward ports to local server

2021-05-03 20:43:29 - last edited 2021-05-10 20:36:16

Model: Archer MR200

Hardware Version: V1

Firmware Version: latest

Hi,

This router does not forward ports 20 or 8080 to a local server, no matter what.

I have these 2 ports forwarding in Virtual Servers but they are not accessible from the outside. Both SSH and HTTP services work from the LAN.

I have enable remote administration and it works. But it refuses to forward these ports to the server.

This has worked before with port 80 and another server.

What can be missing?

I've just enabled DMZ for this server IP address, but to no avail.

Thanks.

2 Reply

Kevin_Z

2021-05-10 05:45:36

Posts: 21609

Helpful: 5055

Solutions: 2546

Stories: 21

Registered: 2018-12-24

Re:Archer MR200 does not forward ports to local server

2021-05-10 05:45:36

@jmss

Hi, if you want to access the local server from an outside network, please firstly ensure you are obtaining a public IP address from your SIM card carrier on the MR200, if not, you cannot access the local server even thought you open the ports on the router. Check this article for more details:

https://www.tp-link.com/support/faq/1675/

This stories may help more: https://community.tp-link.com/en/home/stories/detail/1750.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

jmss

LV1

2021-05-10 20:35:20 - last edited 2021-05-10 20:35:37

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-05-03

Re:Archer MR200 does not forward ports to local server

2021-05-10 20:35:20 - last edited 2021-05-10 20:35:37

Hi, @Kevin_Z.

That's what I did. I'm just not sure whether I configured the server with a static IP address on the router. But I was sure about its IP address when I was experimenting.

This has worked before with another server (different hardware).

We'll keep investigating, thanks.

Archer MR200 does not forward ports to local server

Archer MR200 does not forward ports to local server

Information

Voters 0

Tags