Home Network Community > Range Extenders > RE650 Configuration page showing internet status as 'unknown' even though there is internet
< Range Extenders

RE650 Configuration page showing internet status as 'unknown' even though there is internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

RE650 Configuration page showing internet status as 'unknown' even though there is internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE650 Configuration page showing internet status as 'unknown' even though there is internet
RE650 Configuration page showing internet status as 'unknown' even though there is internet
2021-02-16 23:34:04 - last edited 2021-10-20 03:16:33
Model: RE650  
Hardware Version: V1
Firmware Version: 1.0.9 Build 20201112 Rel. 66232

Hello community,

 

So I am making this thread to address and shed the light on a very minimalistic issue, or bug, that I've been encountering with the RE650 Extender ever since I have purchased it over a year ago.

 

So as you may know, the RE650 has two modes: Range Extender and Access Point. Whenever I am using it as an Access Point, the main status section of the extender's configuration page always shows an exclamation mark next to the internet logo, and on the bottom there is written "Internet status: Unknown"

 

On the other hand, if I am using the RE650 as a Range Extender, it is not the case and everything is normal.

 

I have to mention that the RE650 has received so far 3 firmware updates, and I have used all 3 versions (currently on the latest build) but this issue still exists.

 

Maybe this small bug needs a patch? It's no big deal but I just thought of letting tplink know of it... Also if anyone has the same problem let me know!

 

  6      
 
  6      
 
#1
Options
1 Accepted Solution
Re:RE650 Configuration page showing internet status as 'unknown' even though there is internet-Solution
2021-03-03 06:08:28 - last edited 2021-10-20 03:16:33

@TP-Link I am observing the same in AP mode: "Internet Status: Unknown".

 

Seeing this on both my AP's:

1. RE650 v1.0, firmware 1.0.9 Build 20201112 Rel. 66232(8543)

2. RE450 v2.0, firmware 1.0.5 Build 20200914 Rel. 34203(8583)

 

Both connected to ASUS RT-AC87U router via Linksys Gigabit switch SD2008 v3.0 (over Ethernet).

 

Note:

 

1. Both AP's configured with:

        a. Static IP address (under Network -> Settings -> Network Settings)

        b. "DHCP Server" is set to "Off" (under Network -> Settings -> DHCP Server Settings)

2. !!!!  If "DHCP Server" is set to AUTO, I see "Internet Status: Connected"  !!!!!

 

 

 

Recommended Solution
  4  
  4  
#5
Options
13 Reply
Re:RE650 Configuration page showing internet status as 'unknown' even though there is internet
2021-02-24 08:22:19 - last edited 2021-02-24 08:24:12

@Leburu 

Hi, thank you very much for your feedback and we have reported to the senior engineers for further assistance.

Have you tried to change the DNS server on the RE650 to 8.8.8.8/8.8.4.4 to see whether it helped or not?（settings>network>DHCP server settings）

By the way, what Is the model number of your home router?

Could you please export the system log and send it to me as well?

Thank you very much and wait for your reply.

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#2
Options
Re:RE650 Configuration page showing internet status as 'unknown' even though there is internet
2021-02-24 14:01:55 - last edited 2022-03-30 18:20:37

@TP-Link Alright so, changing the DNS to google’s in the DHCP settings unfortunately didn’t solve the issue.

 

My home router is a Huawei B525s-65a. It is a 4G LTE router.

 

Nevertheless, please find below the system logs of the RE650.

File:
systemlog.txtDownload
  0  
  0  
#4
Options
Re:RE650 Configuration page showing internet status as 'unknown' even though there is internet-Solution
2021-03-03 06:08:28 - last edited 2021-10-20 03:16:33

@TP-Link I am observing the same in AP mode: "Internet Status: Unknown".

 

Seeing this on both my AP's:

1. RE650 v1.0, firmware 1.0.9 Build 20201112 Rel. 66232(8543)

2. RE450 v2.0, firmware 1.0.5 Build 20200914 Rel. 34203(8583)

 

Both connected to ASUS RT-AC87U router via Linksys Gigabit switch SD2008 v3.0 (over Ethernet).

 

Note:

 

1. Both AP's configured with:

        a. Static IP address (under Network -> Settings -> Network Settings)

        b. "DHCP Server" is set to "Off" (under Network -> Settings -> DHCP Server Settings)

2. !!!!  If "DHCP Server" is set to AUTO, I see "Internet Status: Connected"  !!!!!

 

 

 

Recommended Solution
  4  
  4  
#5
Options
Re:RE650 Configuration page showing internet status as 'unknown' even though there is internet
2021-05-19 13:19:58

@Leburu I have the same issue with my RE605X. It is constantly pending between Internet Status: connected and unknown.

  1  
  1  
#6
Options
Re:RE650 Configuration page showing internet status as 'unknown' even though there is internet
2021-09-30 07:22:17

@bhavin i just noticee the same problem just of internet status unkown. Saw your post and set dhcp server to Auto and it also changed to connected!!  Does anyone know why that is?  What does DHCP Server settings have to do with the internet connection other than having it on and the ip pool conflicting with the host router's dhcp server pool.  So i don't get it? why did that make a difference?

  0  
  0  
#7
Options
Re:RE650 Configuration page showing internet status as 'unknown' even though there is internet
2021-10-26 02:35:50 - last edited 2021-10-26 02:41:08

@Leburu I face the same problem,but in extender mode, made a post explaining everything in detail, and so far nothing, other companies are updating old devices and adding Mesh technology to all and devices that use the same chip that, for example, the RE650 V1 uses, but TP-LINK says it can't, and forces its customers to buy a new version, paying twice the same amount...Totally inhumane....TP-LINK get new engineers and clean up this mess, make it worth the money we give your products by adding features and improvements, not bugs and new issues with every update.

  1  
  1  
#8
Options
Re:RE650 Configuration page showing internet status as 'unknown' even though there is internet
2022-03-20 12:49:00

  @Leburu Same problem here, except on RE200 v2.1 with latest firmware.

  0  
  0  
#9
Options
Re:RE650 Configuration page showing internet status as 'unknown' even though there is internet
2022-03-29 07:07:33

 Hello  @StepanM 

Do you use default  settings or manually set up static IP on the range extender ? Does refresh UI helps? 

It is suggested creating a new thread with the concern with a photo, device firmware & hardware  and we will try to look up that further. 

 

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#10
Options
Re:RE650 Configuration page showing internet status as 'unknown' even though there is internet
2022-03-29 19:03:08

  @Solla-topee I did set it up to use static IP and manually configured DHCP. I use static IP for easy access to the interface through a browser at any time. Manual settings for DHCP since I like having control over stuff. I also know what I'm doing.

 

Internet connection works, but this is what I see in the admin interface any time I look at it:

  2  
  2  
#11
Options
Re:RE650 Configuration page showing internet status as 'unknown' even though there is internet
2022-03-30 08:17:33 - last edited 2022-03-30 08:18:42

  @StepanM thank you for your photo, it seems that RE DHCP OFF lets RE think it has disconnected from router,I will check with our team and see if any improvement could be done

At this moment, as client devices could still get Internet from RE, you could leave the settings on RE, or you might try turning on DHCP server on RE shared on #5 of this thread

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  1  
  1  
#12
Options
12

Information

Helpful: 6

Views: 4714

Replies: 14

Related Articles
 TP-Link RE650: no access to the configuration page?
814 0
 RE650 extender showing obtaining IP address/IP configuration failure in andriod phones
1828 0
 After configuration, it's showing not Internet
244 0
 RE650 not showing logs
1445 0
My devices are connected to RE650 but there is no internet
482 0
 Access to configuration page
614 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.