Home Network Community > 5G/4G Wi-Fi Routers/MiFi > [TL-MR100] Gateway must be on the same subnet with the device interface's IP address
< 5G/4G Wi-Fi Routers/MiFi

[TL-MR100] Gateway must be on the same subnet with the device interface's IP address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

[TL-MR100] Gateway must be on the same subnet with the device interface's IP address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
[TL-MR100] Gateway must be on the same subnet with the device interface's IP address
[TL-MR100] Gateway must be on the same subnet with the device interface's IP address
2021-02-13 11:26:08 - last edited 2021-02-24 07:52:09
Model: Adapter  
Hardware Version: V1
Firmware Version:

I get a weird error when I try to enable a static route on the TL-MR100 v1 00000001. (TL-MR100 not present in the Model list)

 

 

Why? the gateway is obviously on the same subnet...

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:[TL-MR100] Gateway must be on the same subnet with the device interface's IP address-Solution
2021-02-24 07:39:35 - last edited 2021-02-24 07:52:09

@alexisfrjp 

 

What is the LAN IP address of the MR100? This gateway setting on the Static Route page should be in the same IP subnet of the MR100, please check again.

 

BTW, here is the guide to configure the Static Route on the MR100, give it a go: https://www.tp-link.com/support/faq/1660/.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  2  
  2  
#2
Options
3 Reply
Re:[TL-MR100] Gateway must be on the same subnet with the device interface's IP address-Solution
2021-02-24 07:39:35 - last edited 2021-02-24 07:52:09

@alexisfrjp 

 

What is the LAN IP address of the MR100? This gateway setting on the Static Route page should be in the same IP subnet of the MR100, please check again.

 

BTW, here is the guide to configure the Static Route on the MR100, give it a go: https://www.tp-link.com/support/faq/1660/.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  2  
  2  
#2
Options
Re:[TL-MR100] Gateway must be on the same subnet with the device interface's IP address
2021-02-24 07:51:46 - last edited 2021-02-24 07:51:59

I was a bit confused because on linux when we set up a static route (ip route add ...) we provide the subnet's gateway of the IP we are gonna use.

 

Thank you!

  0  
  0  
#3
Options
Re:[TL-MR100] Gateway must be on the same subnet with the device interface's IP address
2021-02-24 11:55:18

@alexisfrjp 

 

Can you draw a network diagram that displays how the MR100 and the server connected? Please mark the IP address and gateway info in the network as displayed in the guide we provided.

 

BTW, did you choose the Interface as LAN on the MR100 setup page?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 2440

Replies: 3

Related Articles
what password must?
306 0
TL-MR100(EU)_V1_201016 firmware
4693 4
TL-MR100 BANDWIDTH CONTROL
3258 2
 Tl Mr100
396 0
 TL-MR100
412 0
 It must be me !!!!!!
365 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.