Deco M4 - speed capped at 100Mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M4 - speed capped at 100Mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M4 - speed capped at 100Mbps
Deco M4 - speed capped at 100Mbps
2021-01-31 16:29:01
Model: Adapter  
Hardware Version: V2
Firmware Version:

Model: Deco M4R

Hardware Version: V2

Firmware Version: 1.4.3 Build 20200918 Rel. 74289

 

Hi

 

I've been using Deco M4 since 11 months.

The setup was:

TM modem ==> Asus Router ==> Deco M4 1st unit ==> Deco M4 2nd unit.

 

I am not able to receive 300mbps from my Mesh Wi-Fi where by I am able to receive from my Router. Can anyone assist me on this.

 

Thanks & Regards,

Jev

jevnessh20@gmail.com

  0      
  0      
#1
Options
3 Reply
Re:Deco M4 - speed capped at 100Mbps
2021-02-02 06:33:10

@JevJeff 

Hi

Is the Deco on the access point?

And the two Deco M4 are connected via Ethernet backhaul, or wireless backhaul?

How much speed you could get exactly from the M4, both via Ethernet and wireless connection?

Please also make sure the QoS is setup to standard and no device is setup high priority;

 

Thank you very much and wait for your reply.

 

  0  
  0  
#2
Options
Re:Deco M4 - speed capped at 100Mbps
2021-08-09 17:00:22

@TP-Link 

Model:- DECO M4 R FIRMWARE VERSION 1.4.3

 

 

HELLO SIR THIS IS PRANAY I HAV BEEN USING DECO SINCE 1 YR I JJST NOW TOOK AIRTEL FIBRE WITH A PLAN OF 200MBPS WHEN I CONNECTED TO GIGABIT ROUTER WITH GIGABIT PORT GIVES ME 200MBPS BUT WHEN I CONNECT IT WITH DECO EVEN WITH 5GHZ BAND GIVES ME ONLY 93 MBPS. SIR I WAS  USING MY DECO THROUGH THIS AS A ACCESS POINT(ETHERNET BACKHAUL) WHAT I DID WRONG I DONT KNOW PLZ SUGGEST ME A SOLUTION AS IN IN ACCESS POINT MODE THERE IS NO QOS......

 

 

 

 

 

  2  
  2  
#3
Options
Re:Deco M4 - speed capped at 100Mbps
2021-08-11 05:41:11

@KRISHNA143 

HI,

Have you checked the Ethernet speed from the main Deco M4?

If possible, please draw a simple picture of your network topology, like ISP modem router—main Deco M4(AP mode)? Is there any network switch in use, if yes, how about the model number?

Have you changed a different Ethernet cable to test the speed again?

  0  
  0  
#4
Options