M7650 - No Service Detected
M7650 - No Service Detected
Network Search: Auto
Purchase Date: Sept 30, 2020 (Few Months Old)
IP Address: 0.0.0.0
ID | Time | Type | Level | Content |
---|---|---|---|---|
1 | 11-10 08:12:43 | WLAN | INFO | Auto down timer start to count down. |
2 | 11-10 08:12:43 | WLAN | INFO | Start Auto Down Timer |
3 | 11-10 08:12:43 | WLAN | INFO | Current STA Num: [0] |
4 | 11-10 08:12:43 | WLAN | ERROR | Get hostapd sta mac failed: hostapd Parse mac failed |
5 | 11-10 08:12:43 | WLAN | INFO | AP Switch ON |
6 | 11-10 08:12:43 | WLAN | ERROR | wm_system_call fails cmd[ip -6 route del fe80::/64 dev wlan0] |
7 | 11-10 08:12:43 | WLAN | ERROR | wm_system_call fails cmd[route del -net 169.254.1.0 netmask 255.255.255.0 dev wlan0] |
8 | 11-10 08:12:43 | WLAN | ERROR | wm_system_call fails cmd[brctl addif bridge0 wlan0] |
9 | 11-10 08:12:41 | WLAN | ERROR | wm_system_call fails cmd[killall -9 hostapd] |
10 | 11-10 08:12:41 | WLAN | ERROR | wm_system_call fails cmd[pgrep hostapd] |
11 | 11-10 08:12:41 | WLAN | ERROR | wm_system_call fails cmd[pgrep hostapd] |
12 | 11-10 08:12:39 | WLAN | INFO | AP Switch OFF |
13 | 11-10 08:12:38 | WLAN | INFO | put wake up WLAN work to wq. |
14 | 11-10 08:12:38 | WLAN | INFO | put shutdown WLAN work to wq. |
15 | 11-10 08:11:59 | WLAN | INFO | Auto down timer start to count down. |
16 | 11-10 08:11:59 | WLAN | INFO | Start Auto Down Timer |
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Any help?
- Copy Link
- Report Inappropriate Content
Any update? I am using tp-link M7200 and i have same problem. Can somebody help us?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, Can I have a picture of the screenshot of the error message when you failed to update the firmware?
As for the internet issue, could you please send me a picture of the advanced>status page?
And please also save a picture when it gave you an error when doing manual network research.
By the way, how long have you had the M7650?
Then Please refer to the private message for the beta firmware.
Thank you very much.
- Copy Link
- Report Inappropriate Content
@TP-Link thank you for your reply
I bought the device in end like December 2019 or January 2020. Unfortunately due to COVID, it did not get used much. Also I noticed the sticker on the device says V1.1 but the software says V1.0. If I try changing the firmware for V1.0 that works but when I try firmware images for V1.1, it says it is not for this version.
Here are the images you requested
For searching for networks, when I try via the web I get the following error
with the app, I get another error
- Copy Link
- Report Inappropriate Content
Thank you and are you able to update the beta firmware?
- Copy Link
- Report Inappropriate Content
Dear @TP-Link
I tried but it doesnt seem to connect to the device via USB. The read me says the device must be powered OFF when I connect to the USB. Is that correct?
Thank you
- Copy Link
- Report Inappropriate Content
Hi, thank you for the patience.
It is right to leave the MiFi power off.
Would you mind trying to turn off the windows firewall, then restart the computer and run the firmware recovery program again?
Please also reset M7650 once to have a look. (there is a reset pinhole after removing the back case and you could hold it for 10s until “Power Off” appears on the screen)
At the same time, for the internet service, I see the ISP profile has not been correctly updated with the SIM carrier- Etisalat in the U.A.E.
Have you tried to manually create the ISP APN profile to have a look:
Thank you.
- Copy Link
- Report Inappropriate Content
Dear @TP-Link
Thank you so much for your reply and your help.
Tried the steps you mentioned but still it is not working It just gives me the fail message. Here is the log from the log button
--2021-11-17 09:46:57--
program will start...
--2021-11-17 09:46:59--
Please check if product type and image directory are right!!!
Product Name£ºM7650(EU) 1.1
ImagePath£º.\images\M7650(EU) 1.1
--2021-11-17 09:46:59--
device1:Start to update, image directory is .\images\M7650(EU) 1.1
--2021-11-17 09:51:05--
program will start...
--2021-11-17 09:51:11--
Please check if product type and image directory are right!!!
Product Name£ºM7650(EU) 1.1
ImagePath£º.\images\M7650(EU) 1.1
--2021-11-17 09:51:11--
device1:Start to update, image directory is .\images\M7650(EU) 1.1
--2021-11-17 09:53:22--
device1£ºUnconnected!
I also tried to set the Etisalat APN manually from what I could find via google.
But it did not work. Here are the logs from the device as well, specifically from the file logcat.txt
2018-08-08 00:00:58.299 I/TP_MOBILE( 556): 1533686458 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:58.299 I/TP_MOBILE( 556): 1533686458 Now process message (id: 0x4F972104), MSGID = 0x00000041.
2018-08-08 00:00:56.279 I/TP_MOBILE( 556): 1533686456 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:56.279 I/TP_MOBILE( 556): 1533686456 Now process message (id: 0x093A9E16), MSGID = 0x00000041.
2018-08-08 00:00:54.259 I/TP_MOBILE( 556): 1533686454 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:54.259 I/TP_MOBILE( 556): 1533686454 Now process message (id: 0x0B8D6FF6), MSGID = 0x00000041.
2018-08-08 00:00:52.289 E/TP_MOBILE( 556): 1533686452 Get sim card number failed (0).
2018-08-08 00:00:52.289 E/TP_MOBILE( 556): 1533686452 0x00000010 QMI_ERR_NOT_PROVISIONED
2018-08-08 00:00:52.279 I/TP_MOBILE( 556): 1533686452 Now process message (id: 0x20BC3DBB), MSGID = 0x00000069.
2018-08-08 00:00:52.239 I/TP_MOBILE( 556): 1533686452 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:52.239 I/TP_MOBILE( 556): 1533686452 Now process message (id: 0x455DF9B8), MSGID = 0x00000041.
2018-08-08 00:00:50.219 I/TP_MOBILE( 556): 1533686450 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:50.219 I/TP_MOBILE( 556): 1533686450 Now process message (id: 0x29FED76E), MSGID = 0x00000041.
2018-08-08 00:00:48.199 I/TP_MOBILE( 556): 1533686448 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:48.199 I/TP_MOBILE( 556): 1533686448 Now process message (id: 0x23BAFE76), MSGID = 0x00000041.
2018-08-08 00:00:46.169 I/TP_MOBILE( 556): 1533686446 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:46.169 I/TP_MOBILE( 556): 1533686446 Now process message (id: 0x3279D6AB), MSGID = 0x00000041.
2018-08-08 00:00:44.159 I/TP_MOBILE( 556): 1533686444 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:44.159 I/TP_MOBILE( 556): 1533686444 Now process message (id: 0x54713B97), MSGID = 0x00000041.
2018-08-08 00:00:42.329 E/TP_MOBILE( 556): 1533686442 Get sim card number failed (0).
2018-08-08 00:00:42.329 E/TP_MOBILE( 556): 1533686442 0x00000010 QMI_ERR_NOT_PROVISIONED
2018-08-08 00:00:42.319 I/TP_MOBILE( 556): 1533686442 Now process message (id: 0x78AD3E49), MSGID = 0x00000069.
2018-08-08 00:00:42.139 I/TP_MOBILE( 556): 1533686442 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:42.139 I/TP_MOBILE( 556): 1533686442 Now process message (id: 0x648C29C5), MSGID = 0x00000041.
2018-08-08 00:00:40.109 I/TP_MOBILE( 556): 1533686440 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:40.109 I/TP_MOBILE( 556): 1533686440 Now process message (id: 0x199C136C), MSGID = 0x00000041.
2018-08-08 00:00:38.069 I/TP_MOBILE( 556): 1533686438 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:38.069 I/TP_MOBILE( 556): 1533686438 Now process message (id: 0x0B1FC15A), MSGID = 0x00000041.
2018-08-08 00:00:36.049 I/TP_MOBILE( 556): 1533686436 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:36.049 I/TP_MOBILE( 556): 1533686436 Now process message (id: 0x628429B5), MSGID = 0x00000041.
2018-08-08 00:00:34.029 I/TP_MOBILE( 556): 1533686434 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:34.029 I/TP_MOBILE( 556): 1533686434 Now process message (id: 0x5FC73618), MSGID = 0x00000041.
2018-08-08 00:00:32.399 E/TP_MOBILE( 556): 1533686432 Get sim card number failed (0).
2018-08-08 00:00:32.399 E/TP_MOBILE( 556): 1533686432 0x00000010 QMI_ERR_NOT_PROVISIONED
2018-08-08 00:00:32.389 I/TP_MOBILE( 556): 1533686432 Now process message (id: 0x60CEADE6), MSGID = 0x00000069.
2018-08-08 00:00:32.309 E/TP_MOBILE( 556): 1533686432 Get sim card number failed (0).
2018-08-08 00:00:32.309 E/TP_MOBILE( 556): 1533686432 0x00000010 QMI_ERR_NOT_PROVISIONED
2018-08-08 00:00:32.299 I/TP_MOBILE( 556): 1533686432 Now process message (id: 0x2A884A18), MSGID = 0x00000069.
2018-08-08 00:00:32.009 I/TP_MOBILE( 556): 1533686432 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:32.009 I/TP_MOBILE( 556): 1533686432 Now process message (id: 0x1B2398F9), MSGID = 0x00000041.
2018-08-08 00:00:29.989 I/TP_MOBILE( 556): 1533686429 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:29.989 I/TP_MOBILE( 556): 1533686429 Now process message (id: 0x1F0C2B20), MSGID = 0x00000041.
2018-08-08 00:00:29.419 E/TP_MOBILE( 556): 1533686429 Get sim card number failed (0).
2018-08-08 00:00:29.419 E/TP_MOBILE( 556): 1533686429 0x00000010 QMI_ERR_NOT_PROVISIONED
2018-08-08 00:00:29.399 I/TP_MOBILE( 556): 1533686429 Now process message (id: 0x39C118AD), MSGID = 0x00000069.
2018-08-08 00:00:27.969 I/TP_MOBILE( 556): 1533686427 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:27.969 I/TP_MOBILE( 556): 1533686427 Now process message (id: 0x1F1749CB), MSGID = 0x00000041.
2018-08-08 00:00:25.949 I/TP_MOBILE( 556): 1533686425 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:25.949 I/TP_MOBILE( 556): 1533686425 Now process message (id: 0x4EC90132), MSGID = 0x00000041.
2018-08-08 00:00:23.919 I/TP_MOBILE( 556): 1533686423 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:23.919 I/TP_MOBILE( 556): 1533686423 Now process message (id: 0x3422940D), MSGID = 0x00000041.
2018-08-08 00:00:21.899 I/TP_MOBILE( 556): 1533686421 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:21.899 I/TP_MOBILE( 556): 1533686421 Now process message (id: 0x0F61BD2B), MSGID = 0x00000041.
2018-08-08 00:00:19.889 I/TP_MOBILE( 556): 1533686419 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:19.889 I/TP_MOBILE( 556): 1533686419 Now process message (id: 0x265FDF1F), MSGID = 0x00000041.
2018-08-08 00:00:18.699 E/POWER_CONSUMPTION( 794): socket bind success,start listen
2018-08-08 00:00:18.699 E/POWER_CONSUMPTION( 794): socket create success
2018-08-08 00:00:17.859 I/TP_MOBILE( 556): 1533686417 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:17.859 I/TP_MOBILE( 556): 1533686417 Now process message (id: 0x52515FAB), MSGID = 0x00000041.
2018-08-08 00:00:15.849 I/TP_MOBILE( 556): 1533686415 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:15.849 I/TP_MOBILE( 556): 1533686415 Now process message (id: 0x7B9E890D), MSGID = 0x00000041.
2018-08-08 00:00:13.819 I/TP_MOBILE( 556): 1533686413 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:13.819 I/TP_MOBILE( 556): 1533686413 Now process message (id: 0x493C153C), MSGID = 0x00000041.
2018-08-08 00:00:11.789 I/TP_MOBILE( 556): 1533686411 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:11.789 I/TP_MOBILE( 556): 1533686411 Now process message (id: 0x1D8CDCA7), MSGID = 0x00000041.
2018-08-08 00:00:09.769 I/TP_MOBILE( 556): 1533686409 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:09.769 I/TP_MOBILE( 556): 1533686409 Now process message (id: 0x26712C29), MSGID = 0x00000041.
2018-08-08 00:00:07.759 I/TP_MOBILE( 556): 1533686407 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:07.759 I/TP_MOBILE( 556): 1533686407 Now process message (id: 0x6AFC45F3), MSGID = 0x00000041.
2018-08-08 00:00:05.739 I/TP_MOBILE( 556): 1533686405 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:05.739 I/TP_MOBILE( 556): 1533686405 Now process message (id: 0x19B626EE), MSGID = 0x00000041.
2018-08-08 00:00:04.619 I/WLAN_-_user( 777): Auto down timer start to count down.
2018-08-08 00:00:04.619 I/WLAN_-_user( 777): Start Auto Down Timer
2018-08-08 00:00:04.619 I/WLAN_-_user( 777): Current STA Num: [0]
2018-08-08 00:00:04.619 E/WLAN_-_user( 777): Get hostapd sta mac failed: hostapd Parse mac failed
2018-08-08 00:00:04.619 I/WLAN_-_user( 777): AP Switch ON
2018-08-08 00:00:04.539 E/WLAN_-_user( 777): wm_system_call fails cmd[brctl addif bridge0 wlan0]
2018-08-08 00:00:03.719 I/TP_MOBILE( 556): 1533686403 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:03.719 I/TP_MOBILE( 556): 1533686403 Now process message (id: 0x6F75923F), MSGID = 0x00000041.
2018-08-08 00:00:01.649 I/TP_MOBILE( 556): 1533686401 The latest dataflow TX 0, RX 0.
2018-08-08 00:00:01.649 I/TP_MOBILE( 556): 1533686401 Now process message (id: 0x05790BA6), MSGID = 0x00000041.
2018-08-08 00:00:01.579 I/TP_MOBILE( 556): 1533686401 GET_SMSC_ADDRESS response, value = +971506060000
2018-08-08 00:00:01.579 I/TP_MOBILE( 556): 1533686401 no need to init device sca
2018-08-08 00:00:01.579 I/TP_MOBILE( 556): 1533686401 first char is +
2018-08-08 00:00:01.579 I/SMS_-_user( 556): GET_SMSC_ADDRESS response, value = +971506060000
2018-08-08 00:00:01.559 I/TP_MOBILE( 556): 1533686401 length of mnc is 2
2018-08-08 00:00:01.549 E/TP_MOBILE( 556): 1533686401 Get sim card number failed (0).
2018-08-08 00:00:01.549 E/TP_MOBILE( 556): 1533686401 0x00000010 QMI_ERR_NOT_PROVISIONED
2018-08-08 00:00:01.529 I/TP_MOBILE( 556): 1533686401 No need to take any operation.
2018-08-08 00:00:01.529 I/TP_MOBILE( 556): 1533686401 Mobile network not registered, cannot connect.
2018-08-08 00:00:01.529 I/TP_MOBILE( 556): 1533686401 Current: PS-Reg(2), Srv-Stat(0), Conn-Stat(1).
2018-08-08 00:00:01.529 I/TP_MOBILE( 556): 1533686401 No need to take any operation.
2018-08-08 00:00:01.529 I/TP_MOBILE( 556): 1533686401 Mobile network not registered, cannot connect.
2018-08-08 00:00:01.529 I/TP_MOBILE( 556): 1533686401 Current: PS-Reg(2), Srv-Stat(0), Conn-Stat(1).
2018-08-08 00:00:01.529 I/TP_MOBILE( 556): 1533686401 No need to take any operation.
2018-08-08 00:00:01.529 I/TP_MOBILE( 556): 1533686401 Mobile network not registered, cannot connect.
2018-08-08 00:00:01.529 I/TP_MOBILE( 556): 1533686401 Current: PS-Reg(2), Srv-Stat(0), Conn-Stat(1).
2018-08-08 00:00:01.519 I/TP_MOBILE( 556): 1533686401 No need to take any operation.
2018-08-08 00:00:01.519 I/TP_MOBILE( 556): 1533686401 Mobile network not registered, cannot connect.
2018-08-08 00:00:01.519 I/TP_MOBILE( 556): 1533686401 Current: PS-Reg(2), Srv-Stat(0), Conn-Stat(1).
2018-08-08 00:00:01.519 I/TP_MOBILE( 556): 1533686401 Not registered, searching!
2018-08-08 00:00:01.519 I/4G_-_user( 556): Not registered, searching!
2018-08-08 00:00:01.509 W/TP_MOBILE( 556): 1533686401 Event (0x10000001) not found its logic thread.
2018-08-08 00:00:01.499 I/TP_MOBILE( 556): 1533686401 Because in FTM currently, cannot change the mode.
1970-01-01 22:02:33.349 I/TP_MOBILE( 556): 79353 The latest dataflow TX 0, RX 0.
1970-01-01 22:02:33.349 I/TP_MOBILE( 556): 79353 Now process message (id: 0x602127D9), MSGID = 0x00000041.
--------- beginning of /dev/log_radio
1970-01-01 22:02:32.949 I/DHCP_-_user( 640): DHCPACK(bridge0) 192.168.0.163 26:42:60:8b:1a:49 rgb
1970-01-01 22:02:32.939 I/DHCP_-_user( 640): DHCPREQUEST(bridge0) 192.168.0.163 26:42:60:8b:1a:49
1970-01-01 22:02:32.739 E/WLAN_-_user( 777): wm_system_call fails cmd[killall -9 hostapd]
1970-01-01 22:02:32.559 I/WLAN_-_user( 777): put wake up WLAN work to wq.
1970-01-01 22:02:32.559 I/WLAN_-_user( 777): Wake up WLAN.
1970-01-01 22:02:32.539 E/POWER_CONSUMPTION( 794): power_consumptiond start
1970-01-01 22:02:32.539 W/WLAN_-_user( 777): Read ACL setting failed.
1970-01-01 22:02:32.539 E/WLAN_-_user( 777): read acl setting failed: open file err.
1970-01-01 22:02:32.459 E/WLAN_-_user( 777): DM: Get invalid wpa_psk[NULL].
1970-01-01 22:02:31.709 I/OTHER_-_user( 489): Current USB set config times:2
1970-01-01 22:02:31.419 I/others_-_user( 633): dnsmasq open dhcp server
1970-01-01 22:02:31.339 I/DHCP_-_user( 547): dhcp server starting ...
1970-01-01 22:02:31.279 I/DHCP_-_user( 547): dhcp server stopped
1970-01-01 22:02:31.259 E/NETMANAGER_LAN( 547): is_interface_enabled:create ioctl failed!
1970-01-01 22:02:31.249 E/NETMANAGER_LAN( 547): is_interface_enabled:create ioctl failed!
1970-01-01 22:02:30.709 I/OTHER_-_user( 489): Current USB set config times:1
1970-01-01 22:02:30.709 E/USB_DAEMON( 489): switch to single configuration mode
1970-01-01 22:02:30.659 I/OTHER_-_user( 489): Current USB state:1
1970-01-01 22:02:30.599 E/state_ctrl( 513): Unkown temp event
1970-01-01 22:02:30.209 E/WLAN_-_user( 509): wm_connect: connect error
1970-01-01 22:02:29.769 E/state_ctrl( 513): Set device state = 1
1970-01-01 22:02:29.769 E/state_ctrl( 513): Not boot from usb charge, goto normal mode
1970-01-01 22:02:29.769 E/state_ctrl( 513): pon_trigger=0
--------- beginning of /dev/log_system
1970-01-01 22:02:29.599 E/CHARGE ( 484): Batt init voltage = 4308
1970-01-01 22:02:29.599 E/CHARGE ( 484): batt_always_good = 0
--------- beginning of /dev/log_main
- Copy Link
- Report Inappropriate Content
Hi, In this way, we could leave aside the firmware upgrade at this moment.
Did you have one more SIM card available for the test?
I started thinking there might be something wrong with the hardware of M7650.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 3492
Replies: 11