MR200 in wireless router mode: can I have second ip on WAN interface?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MR200 in wireless router mode: can I have second ip on WAN interface?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

giox969b

2021-01-18 18:25:04 - last edited 2021-01-19 08:45:52

Posts: 2

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2021-01-18

MR200 in wireless router mode: can I have second ip on WAN interface?

2021-01-18 18:25:04 - last edited 2021-01-19 08:45:52

Model: Archer MR200

Hardware Version: V4

Firmware Version:

I have a MR200. My main internet connection is VDSL, and I want a backup internet connection via 4G SIM.
According to the MR200 manual, "In wireless router mode, you can use 3G/4G network as a backup solution for internet access.".
Ok, so I configured the MR200 for wireless router mode and PPPoE on the wan interface.

Now the problem: the VDSL modem has its own IP address for management, on a different subnet than LAN. How can I reach it?

See the following diagram: I need to reach 192.168.53.254 from a browser in the LAN. The only way I know is to assing a fixed IP address on the MR200 WAN interface, without an associated gateway. But it seems not to be possible with the MR200.

Which one is the correct solution to manage the VDSL router from the LAN ?

1 Reply

Kevin_Z

2021-01-26 08:29:30

Posts: 21546

Helpful: 5006

Solutions: 2536

Stories: 21

Registered: 2018-12-24

Re:MR200 in wireless router mode: can I have second ip on WAN interface?

2021-01-26 08:29:30

@giox969b

If the VDSL modem is in bridge mode, I'm afraid you cannot access its web interface directly by entering 192.168.53.254. You need to assign a static IP address such as 192.168.53.100, subnet as 255.255.255.0 on the computer, connect it directly to the LAN port of the VDSL modem, then launch a browser and type in 192.168.53.254 to access it.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

MR200 in wireless router mode: can I have second ip on WAN interface?

MR200 in wireless router mode: can I have second ip on WAN interface?

Information

Voters 0

Tags