AX20 vs2: switches for wifi and onemesh
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi Kevin,
Instead of the C2300, I now look at the AX20v2 (according the Dutch site of TP-Link).
I have 2 questions about this router.
1. does the AX20vs2 has an on/off-switch for Onemesh ?
2. can wifi-5ghz be switched off, so that only wifi-2.4ghz is on and vice versa ?
Greetings and have a good 2021 !
AX20 v1 supports OneMesh on/off switch, so I assume that AX20 v2 will support that too. As for the 5GHz band, it's the same assumption - on AX20 v1 you can enable/disable a particular band - it should be the same for AX20 v2.
The following is from AX20 v1
OneMesh button:
Wireless Settings:
Yes, there are independent switch boxes for both bands - I just had a screenshot for 2.4 GHz band - it's the same for 5GHz band.
AX20 v1 supports OneMesh on/off switch, so I assume that AX20 v2 will support that too. As for the 5GHz band, it's the same assumption - on AX20 v1 you can enable/disable a particular band - it should be the same for AX20 v2.
The following is from AX20 v1
OneMesh button:
Wireless Settings:
Yes, there are independent switch boxes for both bands - I just had a screenshot for 2.4 GHz band - it's the same for 5GHz band.
!