M7650 failed to upgrade FW
Hello, Im trying to update my M7650 via usb from 1.1.6 Build 180723 Rel.1022n to newest firmware available - M7650(EU)_V1.1_201110
receive this message
"Update failed. The update file is not suitable for the current firmware."
My Device info
Model: M7650
Firmware Version: 1.1.6 Build 180723 Rel.1022n
Hardware Version: M7650(EU) v1.1
Please, help
Thanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
if you have pc with old win 10 v1803 and lower then try on it
also only difference from stock windows on my pc is SMB 1.0 client enabled and enabled NetBIOS over TCP/IP (but i cannot figure out how it may affect in this case)
do not use any usb hubs extenders adaptors and other stuff - only direct connection with good cable
I performed my upgrade only with old win version and multiple (5 or 6) attempts, as i remember sequence then plug cable, router state (on off), software runned or not really matters, try all combos
- Copy Link
- Report Inappropriate Content
I installed Qualcomm HS USB drivers and managed to make it show connected in the app. It managed to flash MP but does not proceed to flash AP. I get "Fail to get fastboot handle"
Did you install any drivers?
- Copy Link
- Report Inappropriate Content
@Evg79 Can you send the beta firmware and the software to upgrade called "programtool-simplify v 1.0.4" on my email arjz@live.fr please thanks
- Copy Link
- Report Inappropriate Content
no, I did not install any drivers
- Copy Link
- Report Inappropriate Content
This is strange then. Because it means windows installed drivers. Can you tell me how is the m7650 recognised in com ports in your pc?
- Copy Link
- Report Inappropriate Content
sorry but i already moved on next firmware version
but as i remember programtool listen specific port then actually change device composition mode via adb command at this moment device manager in windows shows modem (but as i remember only as one device) so i think you can try to remove qualcomm drivers to check their influence
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link Hello. My current firmware version is: "1.1.6 Build 180723 Rel.1022n" and i'd like to upgrade to "M7650(EU) 1.1_1.1.9 Build 220418 Rel.1027n_User", but i get the usual error.
Can you send me the beta file please?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 13317
Replies: 91
Voters 0
No one has voted for it yet.