TP-Link AC1200 Archer T4E cannot see 5GHz network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link AC1200 Archer T4E cannot see 5GHz network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link AC1200 Archer T4E cannot see 5GHz network
TP-Link AC1200 Archer T4E cannot see 5GHz network
2020-12-24 06:15:06
Model: Adapter  
Hardware Version: V1
Firmware Version:

As per subject. I purchased this card to upgrade from the N300 and it cannot see the 5GHz network. Both 2.4GHz and 5GHz use the same SSID - could that be the issue?

  0      
  0      
#1
Options
1 Reply
Re:TP-Link AC1200 Archer T4E cannot see 5GHz network
2020-12-30 08:33:35

@Wulf 

 

What is the model number of your wireless router? You may set a different 5G and 2.4G network to confirm this.

 

If still cannot detect the 5G signal, try to modify the 5G wireless settings on the router, such as change the channel to 36,40,44, channel width to be 40MHz/80MHz to check again.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options