TP-Link Archer T2U Nano AC600 Not showing 5G band
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
My TP-Link Archer T2U Nano AC600 is not showing 5G router band even though its visible in my smartphone.Also in the device manager properties 5G band is not visible. I am using win 8.1 single language 64 bit. Please provide a fix
.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi Kevin, thanks for guiding. Changing the channel band did fix my issue. I can see my network when i am on channel 36 or 40, for other bands i still cant see it.
Currently i have changed my band to 40. I wanted to know how does this affect my connection, also which band is preferred 36 or 40?
Thanks
- Copy Link
- Report Inappropriate Content
Were you unable to detect any 5ghz or just your own one?
What is the model number of your wireless router? It is suggested changing the router's 5GHz band channel to 36,40,44, channel width to be 40MHz/80MHz to check again.
Try to update the following driver if none of the above helps:
https://static.tp-link.com/2020/202006/20200601/00015960-RTLWlanU_WindowsDriver_1030.38.0712.2019_Drv_3.00.0032.L.zip
How to install the driver: https://www.tp-link.com/support/faq/920/.
- Copy Link
- Report Inappropriate Content
I do not have any other 5Ghz networks in range so i cant tell. I my laptop it shows a connection with name as "Hidden Network" and i think that my WiFi because it has full range. But the problem is it never connects after entering the SSID and Password, so i guess its a driver issue.
I tried to update the driver you provided but its only for win 7 and 10. My system is running win 8.1 64 bit. So please provide the driver link so i can check.
- Copy Link
- Report Inappropriate Content
Hi, thanks for getting back. It actually is suggested to enable/broadcast the 5G network on your home router to check if this adapter can "see" the 5G network, as it currently cannot connect to it when it is hidden.
- Copy Link
- Report Inappropriate Content
Hi Kevin,
Thanks for your response.
I see that the "Brodacast SSID" option is already enabled in my router also my smart phone is able to detect and connect to it, the hidden network problem is only in my laptop where i use TP Link adapter.
Thanks
- Copy Link
- Report Inappropriate Content
Try my previous suggestions to change the router's 5GHz band channel to 36,40,44, channel width to be 40MHz/80MHz to check again. Thanks.
- Copy Link
- Report Inappropriate Content
Hi Kevin, thanks for guiding. Changing the channel band did fix my issue. I can see my network when i am on channel 36 or 40, for other bands i still cant see it.
Currently i have changed my band to 40. I wanted to know how does this affect my connection, also which band is preferred 36 or 40?
Thanks
- Copy Link
- Report Inappropriate Content
Glad to know that changing the channel to 40 helps. Generally, the adapter can only see the signal in some specific channels, if your router is broadcasting the 5G in some special channels, then it cannot "see" it.
You can use a Wi-Fi analyzer to verify what are the free and clear 5G channels, if others are using channel 36, you'd better choose 40 to avoid the interference.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 8810
Replies: 7
Voters 0
No one has voted for it yet.