Home Network Community > Wi-Fi Routers > Not connecting to wifi
< Wi-Fi Routers

Not connecting to wifi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Not connecting to wifi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
18 Reply
Re:Not connecting to wifi
2020-12-11 03:53:12

@Ivaylo 

 

my root jiofi info

 

 

i change c6 subnet same as root jiofi

 

 

i connect to root router jiofi on WDS

 

 

on status it says WDS RUNNING

 

 

i disable DHCP on c6 and restart the router

 

but not working

i'm not gettting internet

  0  
  0  
#12
Options
Re:Not connecting to wifi
2020-12-11 05:40:55 - last edited 2020-12-11 06:04:00

For you own protection, when you posting screenshots remove/blur/cover any personal passwords.

What's the LAN IP address of the modem ? Is it 192.168.225.1 ? (Gateway IP in your creenshot /modem/)

If the C6 is with IP address 192.168.0.37, that means the modem should be in 192.168.0.0/24 network as well.

Try to set static wireless channel in the modem - for ex. 5 (Automatic channel selection is enabled on your screenshot /modem/).

Set 20MHz channel width for 2.4 band in C6 (it is Auto in your screenshot /C6/).

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#13
Options
Re:Not connecting to wifi
2020-12-11 05:49:30

@Ivaylo 

 

C6 ip is 192.168.0.37

 

root router ip is 192.168.225.1

 

You can check on the screenshot

  0  
  0  
#14
Options
Re:Not connecting to wifi
2020-12-11 05:53:36 - last edited 2020-12-11 05:58:32

Well, root router should have something like 192.168.0.1/255.255.255.0 as IP address/Mask, to be in the same subnet with the C6 router.

Remember that it was note #1 in the guide for configuring WDS I've sent.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#15
Options
Re:Not connecting to wifi
2020-12-11 05:57:23

@Ivaylo 

my root router cannot change the ip and subnet

 

its fix ip and subnet

you can check screenshot

 

i access root router admin panel by that ip 192.168.225.1

  0  
  0  
#16
Options
Re:Not connecting to wifi
2020-12-11 06:02:27
Then you'll have to change the C6 LAN settings to meet the WDS requirements. Does that router have a DHCP server ? If yes, what's the IP address range that it is configured with ?
If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#17
Options
Re:Not connecting to wifi
2020-12-11 06:04:51

@Ivaylo 

Yes root router also has DHCP

 

but there is no option to check DHCP ip on the panel

  0  
  0  
#18
Options
Re:Not connecting to wifi
2020-12-11 06:09:15 - last edited 2020-12-11 06:19:10

Sorry, but I am not familiar with this type of devices. If that's the case how one could tell what's the IP address range that this router gives to the devices connected to itself ?

For example, if you connect your laptop to the root router via wireless, what's your laptop IP address then ?

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#19
Options
12
Related Articles
Wi-Fi is not connecting properly
1741 0
Archer c6 "no internet access" and sometime not connecting to the wifi saying "limited connection"
76938 12
Connecting to wifi
489 0
Not connecting with my Wi-Fi
143 0
Connecting to Public Wifi
3326 0
Connecting to range extender but not the router!
134 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.