Archer MR200 AC750 Wireless Dual Band 4G LTE Router static routing issue
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I'm having an issue with static routes on Archer MR200 AC750 Wireless Dual Band 4G LTE Router. It looks like that static routes are only working on LAN and not WiFi. Is it possible to enable static routes also on WiFi as none of my devices are connected to LAN.
Kind regards,
Aleš
Hi,
Sorry for a delay, but you gave me quite a homework. 
Here is information about my router:
Firmware Version:1.17.0 0.9.1 v0001.0 Build 200526 Rel.36799n
Hardware Version:Archer MR200 v4 00000001
I have found out issues with static routes, because I was unable to ping devices from network connected to Router 1 except 11.11.11.1 and 11.11.11.253. When I have changed default gateway of one device connected to Router 2 from 11.11.11.1 to 11.11.11.253, I was able to ping and communicate normally from devices connected to Router 1. All devices are connected via WiFi to Router 2 therefore, I think that static routing applies only to LAN.Moreover, all the devices that are connected to Router 1 are using static routes propely without changing default gateway.
Below you can find my network topology.
Here is my static route configuration on Router 2.
