Archer VR2100 v1 00000000 - Restarting daily
Note the router is a VR2100, not 2800 as the 2100 is not listed in the Model box!
Firmware Version:1.1.0 0.9.1 v009e.0 Build 200116 Rel.60756n
Hardware Version:Archer VR2100 v1 00000000
I have been using the VR2100 since 29th September (2 weeks) and it restarts every day.
I didn't notice at first, but I have 1 device that doesn't reconnect to the network when the network goes down.
It seems to be early-ish, before 9am but I have had it restart once in the afternoon.
My iPhone will swap to 4G for approx 1 minute.
Reboot schedule is disabled.
I am in the UK.
I am on Plus.net Fibre extra.
I have reset the router (by holding the reset button at the back for 10+ seconds) and re-entered all the settings.
Interestingly, I reset it at just after 7am on Sunday morning and just after 7am on Monday morning it restarted.
I had been using an HG635 modem wireless router from Talk Talk which stays connected until I restart it.
108 2016-01-01 00:01:05 SYSTEM Notice DSL Link Up us/ds 0/67354 kbps Type 64/65B PTM Annex B
109 2016-01-01 00:00:59 DHCPD Notice Send ACK to 192.168.1.108
110 2016-01-01 00:00:57 DHCPD Notice Recv DECLINE from ZZ:ZZ:ZZ:ZZ:ZZ:ZZ
111 2016-01-01 00:00:57 DHCPD Notice Send ACK to 192.168.1.107
112 2016-01-01 00:00:53 DHCPD Notice Send ACK to 192.168.1.105
113 2016-01-01 00:00:51 DHCPD Notice Send ACK to 192.168.1.109
114 2016-01-01 00:00:47 DHCPD Notice Send ACK to 192.168.1.101
115 2016-01-01 00:00:47 SYSTEM Notice DSL Training
116 2016-01-01 00:00:46 DHCPD Notice Send OFFER with ip 192.168.1.101
117 2016-01-01 00:00:46 DHCPD Information Recv DISCOVER from YY:YY:YY:YY:Y:YY
118 2016-01-01 00:00:44 SYSTEM Notice DSL Link Down
119 2016-01-01 00:00:42 DHCPD Notice Send ACK to 192.168.1.100
120 2016-01-01 00:00:42 DHCPD Notice Send OFFER with ip 192.168.1.100
121 2016-01-01 00:00:42 DHCPD Information Recv DISCOVER from XX:XX:XX:XX:XX:XX
122 2016-01-01 00:00:41 SYSTEM Notice Enable IPv6 SPI Firewall
123 2016-01-01 00:00:41 SYSTEM Notice Enable IPv4 SPI Firewall
124 2016-01-01 00:00:30 SYSTEM Notice DSL Training
125 2016-01-01 00:00:20 IGMP Warning V2 igmp router occured! Not matching ours V3.
There are no logs before the issue because it seems to clear them when restarting.
The time is logged incorrectly, but after connecting this is corrected.
Is there any thing I can do?
I have 2 more weeks, then I will need to return it to Amazon.
Thank you
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Kevin_Z Hi, I haven't heard anything back from the engineer or yourself or other support staff on the forum in any of the multiple threads which exist about these reboot issues with the VR2100. I had an email with a link to a 3rd March beta, which I installed. I did reply to that email, but have heard nothing back at all.
I've converted the router to work as a WiFi router only. It was not my intention to use it this way, but others reported possible improvements doing this. We are still seeing multiple reboots every day. Recovery is a little swifter as the modem remains connected, so the VR2100 takes less time to connect as it hasn't got to restart the DSL too. However it really is not working as it should and this is disappointing and frustrating. It has no connection to load, as it sometimes has rebooted during the night when there's no activity at all. There is no timed reboot set either. Is there another OneMesh DSL router you could send instead which uses a different/more stable chipset? Its wasting so much time now.
Thanks
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3459
Replies: 21
Voters 0
No one has voted for it yet.