My router need a daily boot to improve speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

My router need a daily boot to improve speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
My router need a daily boot to improve speed
My router need a daily boot to improve speed
2020-09-24 17:27:23 - last edited 2020-09-25 03:39:38
Model: Archer C3200  
Hardware Version: V1
Firmware Version: 0.9.1 0.1 v004b.0 Build 170707 Rel.58427n

Hi There, 

I have a Archer C3200 configured as bridge in my network an my laptop is connected to it via cable and wifi.

The speed drops from aroung 90Mpbs to 3Mpbs from one day to another... Thus everyday I need to reboot the router, any clue?

any log I can collect to help the analisys?

 

Cheers

Guto.

  0      
  0      
#1
Options
1 Accepted Solution
Re:My router need a daily boot to improve speed-Solution
2020-09-25 03:39:20 - last edited 2020-09-25 03:39:38

@Guto 

 

Hello, to locate this issue, please help verify some details and we will try to fix it together:
1. Is your C3200 an EU version or a US version, please verify this by referring to the device bottom label.
2. Do you mean both wired devices and wireless devices encounter the same issue at the same time? How did you test the speed via the router? Did you disconnect all the other devices from it and only leave one laptop performing the test? It is suggested to change a new SSID and password and connect only one laptop to perform the speedtest 3 times.
3. How about the wired or wireless negotiation speed on that device when connected to the router? If the link speed is not as good as expected, please try another wireless device with more powerful wireless cards. There is a guide to check the link speed: https://www.tp-link.com/support/faq/2265/
4. Simplify your network layout if there are other routers or RE in your network, just leave the modem and the C3200 on, disconnect other devices, and run the speedtest 3 times. Please ensure the 2.4GHz wireless channel width is set to 40MHz and 5GHz is 80MHz. Here is the guide to modify the wireless settings on the router:
https://www.tp-link.com/support/faq/2292/
 

Additionally, please refer to the instruction below to narrow down the issue.
https://www.tp-link.com/support/faq/2170/

 

Thanks a lot~

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:My router need a daily boot to improve speed-Solution
2020-09-25 03:39:20 - last edited 2020-09-25 03:39:38

@Guto 

 

Hello, to locate this issue, please help verify some details and we will try to fix it together:
1. Is your C3200 an EU version or a US version, please verify this by referring to the device bottom label.
2. Do you mean both wired devices and wireless devices encounter the same issue at the same time? How did you test the speed via the router? Did you disconnect all the other devices from it and only leave one laptop performing the test? It is suggested to change a new SSID and password and connect only one laptop to perform the speedtest 3 times.
3. How about the wired or wireless negotiation speed on that device when connected to the router? If the link speed is not as good as expected, please try another wireless device with more powerful wireless cards. There is a guide to check the link speed: https://www.tp-link.com/support/faq/2265/
4. Simplify your network layout if there are other routers or RE in your network, just leave the modem and the C3200 on, disconnect other devices, and run the speedtest 3 times. Please ensure the 2.4GHz wireless channel width is set to 40MHz and 5GHz is 80MHz. Here is the guide to modify the wireless settings on the router:
https://www.tp-link.com/support/faq/2292/
 

Additionally, please refer to the instruction below to narrow down the issue.
https://www.tp-link.com/support/faq/2170/

 

Thanks a lot~

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options