5ghz slow down wifi
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Model: Archer C50
Hardware Version: V4
Firmware Version: V4
I have Archer C50 dual band router using 2nd Router Operation mode is Wireless Router But 5ghz not give me 100 Mbps and some time Main router 2.4ghz router gives me Up to 100 Mbps and static 5ghz WiFi speed is 93.5 and no 5ghz WiFi near me just 2,4 ghz
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, please help verify some details and we will try to fix it together:
1. Ensure the C50 firmware is up-to-date. If not, update it first and reconfigure it from scratch. Below is the latest firmware:
https://www.tp-link.com/support/download/archer-c50/v4/#Firmware
2. How did you test this 5GHz Wi-Fi speed via the router? Did you disconnect all the other devices from it and only leave one laptop or phone performing the test? It is suggested to change a new SSID and password and connect only one phone or laptop to perform the speedtest 3 times.
3. How about the wireless negotiation speed on that device when connected to 5GHz? If the link speed is not as good as expected, please try another wireless device with more powerful wireless cards.
4. Simplify your network layout if there are other routers or RE in your network, just leave the modem and the C50 on, disconnect other devices, and run the speedtest 3 times. Please ensure the 2.4GHz wireless channel width is set to 40MHz and 5GHz is 80MHz. Here is the guide to modify the wireless settings on the router:
https://www.tp-link.com/support/faq/2292/
5. Please disable QoS on the C50 (if there is one) or try to reset it to the factory defaults, then reconfigure it from scratch.
Additionally, please refer to the instruction below to narrow down the issue.
https://www.tp-link.com/support/faq/2170/
May it help.
- Copy Link
- Report Inappropriate Content
Hello, please help verify some details and we will try to fix it together:
1. Ensure the C50 firmware is up-to-date. If not, update it first and reconfigure it from scratch. Below is the latest firmware:
https://www.tp-link.com/support/download/archer-c50/v4/#Firmware
2. How did you test this 5GHz Wi-Fi speed via the router? Did you disconnect all the other devices from it and only leave one laptop or phone performing the test? It is suggested to change a new SSID and password and connect only one phone or laptop to perform the speedtest 3 times.
3. How about the wireless negotiation speed on that device when connected to 5GHz? If the link speed is not as good as expected, please try another wireless device with more powerful wireless cards.
4. Simplify your network layout if there are other routers or RE in your network, just leave the modem and the C50 on, disconnect other devices, and run the speedtest 3 times. Please ensure the 2.4GHz wireless channel width is set to 40MHz and 5GHz is 80MHz. Here is the guide to modify the wireless settings on the router:
https://www.tp-link.com/support/faq/2292/
5. Please disable QoS on the C50 (if there is one) or try to reset it to the factory defaults, then reconfigure it from scratch.
Additionally, please refer to the instruction below to narrow down the issue.
https://www.tp-link.com/support/faq/2170/
May it help.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1032
Replies: 1
Voters 0
No one has voted for it yet.