TL-Archer MR600: No difference in speed after 4g+

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-Archer MR600: No difference in speed after 4g+

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-Archer MR600: No difference in speed after 4g+
TL-Archer MR600: No difference in speed after 4g+
2020-09-02 17:02:54 - last edited 2020-09-08 07:59:11
Model: Archer MR600  
Hardware Version: V1
Firmware Version: V1

Hi 

 

I have been using MR600 for 5 days with jio sim card in India. It is showing 4g+ but speed is same as it was in my phone or jiofi device(6mps,5mbps,39). Advanced tab on device shows 5,40 but i don't see the difference while using or testing speed on both phone and laptop.

 

Also carrier aggregation is not happening with Airtel sim. I checked by manually selecting bands on phone for airtel. Bands in my area is 1 to 5, of which 1 provides better speed.

 

Kindly suggest a solution.

Thanks and Regards,

Amit K

  0      
  0      
#1
Options
1 Accepted Solution
Re:TL-Archer MR600: No difference in speed after 4g+-Solution
2020-09-08 07:58:44 - last edited 2020-09-08 07:59:11

@Amidirr 

Good day.

Thank you very much for your time and patience.

Normally, Archer MR600 would maintain the same speed as smartphone with same sim card inserted;

And if MR600 could not auto sync to the best 4G band, please try to use the following beta firmware to manually choose band 1 and 5;

https://static.tp-link.com/2020/202004/20200420/Archer_MR600v1_1.1.0_0.9.1_[200417-rel75138]_up_boot_2020-04-20_08.44.31.zip

Thank you very much!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:TL-Archer MR600: No difference in speed after 4g+-Solution
2020-09-08 07:58:44 - last edited 2020-09-08 07:59:11

@Amidirr 

Good day.

Thank you very much for your time and patience.

Normally, Archer MR600 would maintain the same speed as smartphone with same sim card inserted;

And if MR600 could not auto sync to the best 4G band, please try to use the following beta firmware to manually choose band 1 and 5;

https://static.tp-link.com/2020/202004/20200420/Archer_MR600v1_1.1.0_0.9.1_[200417-rel75138]_up_boot_2020-04-20_08.44.31.zip

Thank you very much!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options