Home Network Community > Wi-Fi Routers > Outlook Email Sync Issue
< Wi-Fi Routers

Outlook Email Sync Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Outlook Email Sync Issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Outlook Email Sync Issue
Outlook Email Sync Issue
2020-08-18 15:08:13 - last edited 2020-08-19 06:45:43
Model: Archer C6  
Hardware Version:
Firmware Version:

Whenever i am connected to my WiFi network i cannot connect to my outlook server and it does not sync my email. The moment i switch to my Mobile data hotspot it starts syncing instantly. Has anybody faced this issue?

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Outlook Email Sync Issue-Solution
2020-08-19 06:45:25 - last edited 2020-08-19 06:45:43

@Herin 

 

Hello,

 

May I know who is your ISP and what kind of modem are you using? Is it a cable modem or DSL modem?

 

What if you connect your computer to the modem directly, will you be able to connect to your outlook server? If yes, please then connect your computer to this A6 router with an Ethernet cable and confirm again. You may try to do a MAC clone on the A6 web interface:

https://www.tp-link.com/support/faq/1556/

 

Meanwhile, it is suggested to try to change the WAN DNS server on the A6 to 8.8.8.8 and 8.8.4.4, then confirm again.

 

May it help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Outlook Email Sync Issue-Solution
2020-12-21 18:34:32 - last edited 2020-12-22 02:05:20

@Kevin_Z 

 

Hello Kevin

 

Your suggested solution for NAT hit the jackpot!

I confirm, NAT Booster was activated and its disabling let the Outlook work properly again (e.g. successful sync with the mail server)

Just to answer your second part - used VPN is software based (installed in Windows).

 

Thank you for your support.

Recommended Solution
  3  
  3  
#5
Options
7 Reply
Re:Outlook Email Sync Issue-Solution
2020-08-19 06:45:25 - last edited 2020-08-19 06:45:43

@Herin 

 

Hello,

 

May I know who is your ISP and what kind of modem are you using? Is it a cable modem or DSL modem?

 

What if you connect your computer to the modem directly, will you be able to connect to your outlook server? If yes, please then connect your computer to this A6 router with an Ethernet cable and confirm again. You may try to do a MAC clone on the A6 web interface:

https://www.tp-link.com/support/faq/1556/

 

Meanwhile, it is suggested to try to change the WAN DNS server on the A6 to 8.8.8.8 and 8.8.4.4, then confirm again.

 

May it help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Outlook Email Sync Issue
2020-12-16 20:02:21

@Kevin_Z 

 

Hello

 

I have exactly the same issue as reported above but changing DNS didn't help in my case (router model Archer C80).

Standard web browsing works well, I am connected via VPN and can access corporate intranet. Also Skype is online and I can speak with my co-workers.

The only failing part is Outlook. It can't connect to corporate mail server and sync mails.

Also changing WLAN to LAN didn't help. Merging both bands (2.4 and 5 GHz) didn't help. Forbidding 5 GHz didn't help.

 

I used router's system tools and made a ping test (first to google.com - worked well, second to company mail server and that failed)

I did the same ping test from Windows command prompt and was able to get ping response from both - google as well as mail server (see details from my tests below).

 

*  "mailserver.com" replaices the real mail server name

 

Ping test in router
1) Google ping


Finding host google.com by DNS server (1 of 2).
Pinging google.com [216.58.201.110] with 64 bytes of data:
Reply from 216.58.201.110: bytes=64 time=16ms TTL=117 (seq=0).
Reply from 216.58.201.110: bytes=64 time=1ms TTL=117 (seq=1).
Reply from 216.58.201.110: bytes=64 time=1ms TTL=117 (seq=2).
Reply from 216.58.201.110: bytes=64 time=1ms TTL=117 (seq=3).
Ping statistics for 216.58.201.110:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss).
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 16ms, Average = 4ms

 

2) Mail server ping


Finding host mailserver.com by DNS server (2 of 2).
Ping request could not find host mailserver.com.
Please check the name and try again.

 

Ping test from Windows Command line

 

Mail server ping

 

Pinging mailserver.com [xxx.xxx.xxx.xxx] with 32 bytes of data:
Reply from xxx.xxx.xxx.xxx: bytes=32 time=28ms TTL=125
Reply from xxx.xxx.xxx.xxx: bytes=32 time=32ms TTL=125
Reply from xxx.xxx.xxx.xxx: bytes=32 time=33ms TTL=125
Reply from xxx.xxx.xxx.xxx: bytes=32 time=31ms TTL=125

Ping statistics for xxx.xxx.xxx.xxx:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:
Minimum = 28ms, Maximum = 33ms, Average = 31ms

 

Means, system (windows) can see the mail server but router fails to do the same.

 

Also enclosing logs from router (ISP IP replaced with zzz.zzz.zzz.zzz)

 

Router System log
1 INFO 0days, 00:00:01, [lan]LAN: Attach mirror0 to stack.
2 INFO 0days, 00:00:01, [lan]LAN: Set interface mirror0 ip=192.168.0.1 netmask 255.255.255.0.
3 INFO 0days, 00:00:19, [wan]Attach interface eth0.
4 INFO 0days, 00:00:19, [wan]STATIC-IP: eth0 set ip zzz.zzz.zzz.zzz mask 255.255.255.0 gateway zzz.zzz.zzz.zzz.
5 INFO 0days, 00:00:19, [wan]advanced ddns -wanChanged
6 INFO 0days, 00:00:19, [wan]systool sntpc -sntpRequest
7 INFO 0days, 00:00:19, [dnsproxy]Register Dns Detect
8 INFO 0days, 00:00:19, [dnsproxy]Register primary = 0x7eccc2d5, secondary = 0x46948455
9 INFO 0days, 00:00:19, [httpd]Http server start!
10 WARNING 0days, 00:00:19, [dhcps]Lease host name not found.
11 INFO 0days, 00:00:19, [dhcps]Send OFFER with ip 192.168.0.100.
12 WARNING 0days, 00:00:20, [dhcps]Lease host name not found.
13 INFO 0days, 00:00:20, [dhcps]Send ACK to 192.168.0.100.
14 INFO 0days, 00:00:23, [wan]Wan ethernet port plug on.
15 INFO 0days, 00:00:23, [wan]STATIC-IP: eth0 set ip zzz.zzz.zzz.zzz mask 255.255.255.0 gateway zzz.zzz.zzz.zzz.
16 INFO 0days, 00:00:23, [wan]advanced ddns -wanChanged
17 INFO 0days, 00:00:23, [wan]systool sntpc -sntpRequest
18 INFO 0days, 00:00:23, [dnsproxy]Register Dns Detect
19 INFO 0days, 00:00:23, [dnsproxy]Register primary = 0x7eccc2d5, secondary = 0x46948455
20 INFO 0days, 00:00:37, [dhcps]Send OFFER with ip 192.168.0.101.
21 WARNING 0days, 00:00:37, [dhcps]Lease host name not found.
22 INFO 0days, 00:00:37, [dhcps]Send OFFER with ip 192.168.0.102.
23 INFO 0days, 00:00:38, [dhcps]Send ACK to 192.168.0.101.
24 WARNING 0days, 00:00:39, [dhcps]Lease host name not found.
25 INFO 0days, 00:00:39, [dhcps]Send ACK to 192.168.0.102.
26 WARNING 0days, 00:00:54, [dhcps]IP(C0A80165) not in dhcp pool or equal to server ip, ignore!!!
27 INFO 0days, 00:00:56, [dhcps]Send OFFER with ip 192.168.0.103.
28 INFO 0days, 00:00:56, [dhcps]Send ACK to 192.168.0.103.
29 WARNING 0days, 00:01:09, [dhcps]IP(C0A8016C) not in dhcp pool or equal to server ip, ignore!!!
30 INFO 0days, 00:01:10, [dhcps]Send OFFER with ip 192.168.0.104.
31 INFO 0days, 00:01:11, [dhcps]Send ACK to 192.168.0.104.
32 INFO 0days, 00:02:08, [dhcps]Send OFFER with ip 192.168.0.105.
33 INFO 0days, 00:02:09, [dhcps]Send ACK to 192.168.0.105.
34 INFO 0days, 00:04:45, [dhcps]Send OFFER with ip 192.168.0.106.
35 INFO 0days, 00:04:45, [dhcps]Send ACK to 192.168.0.106.
36 INFO 0days, 00:07:58, [wan]advanced ddns -wanChanged
37 INFO 0days, 00:07:58, [dnsproxy]Register Dns Detect
38 ERROR 0days, 00:07:58, [dnsproxy]register dns server detect error
39 INFO 0days, 00:07:58, [dnsproxy]Register primary = 0x0, secondary = 0x0
40 INFO 0days, 00:07:58, [wan]STATIC-IP: eth0 set ip zzz.zzz.zzz.zzz mask 255.255.255.0 gateway zzz.zzz.zzz.zzz.
41 INFO 0days, 00:07:58, [wan]advanced ddns -wanChanged
42 INFO 0days, 00:07:58, [wan]systool sntpc -sntpRequest
43 INFO 0days, 00:07:58, [dnsproxy]Register Dns Detect
44 INFO 0days, 00:07:58, [dnsproxy]Register primary = 0x8080808, secondary = 0x4040808
45 INFO 0days, 00:11:09, [diag]DNS server=8.8.8.8.
46 INFO 0days, 00:11:09, [diag]Ping progress is now running with id=1024.
47 INFO 0days, 00:11:13, [diag]Stop diagnose ping progress .......
48 INFO 0days, 00:11:13, [diag]Free context force.
49 INFO 0days, 00:15:29, [diag]DNS server=8.8.8.8.
50 INFO 0days, 00:15:29, [diag]Ping progress is now running with id=1025.
51 INFO 0days, 00:15:29, [diag]DNS query (mailserver.com) failed.
52 INFO 0days, 00:15:29, [diag]DNS server=8.8.4.4.
53 INFO 0days, 00:15:29, [diag]DNS query (mailserver.com) failed.
54 INFO 0days, 00:15:30, [diag]DNS query finish, server index=2.
55 INFO 0days, 00:15:31, [diag]Stop diagnose ping progress .......
56 INFO 0days, 00:15:31, [diag]Free context force.
57 INFO 0days, 00:26:19, [dhcps]Send OFFER with ip 192.168.0.107.
58 INFO 0days, 00:26:20, [dhcps]Send ACK to 192.168.0.107.
59 INFO 0days, 00:27:33, [diag]DNS server=8.8.8.8.
60 INFO 0days, 00:27:33, [diag]Ping progress is now running with id=1026.
61 INFO 0days, 00:27:36, [diag]Stop diagnose ping progress .......
62 INFO 0days, 00:27:36, [diag]Free context force.
63 INFO 0days, 00:28:18, [diag]DNS server=8.8.8.8.
64 INFO 0days, 00:28:18, [diag]Ping progress is now running with id=1027.
65 INFO 0days, 00:28:18, [diag]DNS query (mailserver.com) failed.
66 INFO 0days, 00:28:19, [diag]DNS server=8.8.4.4.
67 INFO 0days, 00:28:19, [diag]DNS query (mailserver.com) failed.
68 INFO 0days, 00:28:20, [diag]DNS query finish, server index=2.
69 INFO 0days, 00:28:20, [diag]Stop diagnose ping progress .......
70 INFO 0days, 00:28:20, [diag]Free context force.
71 INFO 0days, 00:30:50, [diag]DNS server=8.8.8.8.
72 INFO 0days, 00:30:50, [diag]Ping progress is now running with id=1028.
73 INFO 0days, 00:30:50, [diag]DNS query (mailserver.com) failed.
74 INFO 0days, 00:30:51, [diag]DNS server=8.8.4.4.
75 INFO 0days, 00:30:51, [diag]DNS query (mailserver.com) failed.
76 INFO 0days, 00:30:52, [diag]DNS query finish, server index=2.
77 INFO 0days, 00:30:52, [diag]Stop diagnose ping progress .......
78 INFO 0days, 00:30:52, [diag]Free context force.
79 INFO 0days, 00:31:56, [diag]Start diagnose tracert progress .......
80 INFO 0days, 00:31:56, [diag]DNS server=8.8.8.8.
81 INFO 0days, 00:31:56, [diag]DNS query (mailserver.com) failed.
82 INFO 0days, 00:31:57, [diag]DNS server=8.8.4.4.
83 INFO 0days, 00:31:57, [diag]DNS query (mailserver.com) failed.
84 INFO 0days, 00:31:58, [diag]DNS query finish, server index=2.
85 INFO 0days, 00:31:58, [diag]Tracert receive echo reply auto stopped, id=1029, sequence=0.
86 INFO 0days, 00:31:58, [diag]Stop diagnose tracert progress .......
87 INFO 0days, 00:31:58, [diag]Free context force.

  0  
  0  
#3
Options
Re:Outlook Email Sync Issue
2020-12-18 02:39:52

@Away 

 

Thank you very much for all the detailed info. As for the mail server service issue, we want to confirm the below details, we hope you could help, thanks:

1. What kind of VPN service are you using on this Windows PC? Is it a VPN software?

2. Please confirm the NAT boost on the C80, is it on or off? You may try to disable it to confirm. You can find it on Advanced-System Tools-System Parameters page.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Outlook Email Sync Issue-Solution
2020-12-21 18:34:32 - last edited 2020-12-22 02:05:20

@Kevin_Z 

 

Hello Kevin

 

Your suggested solution for NAT hit the jackpot!

I confirm, NAT Booster was activated and its disabling let the Outlook work properly again (e.g. successful sync with the mail server)

Just to answer your second part - used VPN is software based (installed in Windows).

 

Thank you for your support.

Recommended Solution
  3  
  3  
#5
Options
Re:Outlook Email Sync Issue
2020-12-22 02:06:05

@Away 

 

Hi, glad to hear that it works, you may then leave the NAT boost off to connect to the mail server.

 

If need any further help, just let us know.

 

Good day~

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options
Re:Outlook Email Sync Issue
2021-04-27 17:08:22 - last edited 2021-04-27 17:15:10

@Herin and @Kevin_Z ,

 

I'm having exactly the same problem on my TP-Link Archer AX20 / 1800.  Outlook for Android works for a while then just stops syncing until I turn Wi-Fi off and work off mobile data.  After turning Wi-Fi back on it will work for a while then stop syncing again.  I tried looking for the NAT boost setting Kevin referred to, but can't find it.

 

How do I fix this ?

  0  
  0  
#7
Options
Re:Outlook Email Sync Issue
2021-04-28 01:35:20

@huddie 

 

Are you also connecting to the Outlook mail server via a VPN connection? Have you tried to change the DNS server on the AX20 to something like 8.8.8.8 and 8.8.4.4?

 

If possible, please kindly drop a detailed network layout, how is the AX20 connected to the network, where is the mail server, etc, then we will confirm if there is any setting we can check on the router.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1231

Replies: 7

Related Articles
 Outlook Email Sync Issue
1035 1
 TL-WR740N and Outlook email issue
1059 0
parental control outlook and https
513 0
 Access only outlook traffic
871 0
 TD-W8970v3 ADSL2+ sync issue
1090 0
Change email
861 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.