Home

Forums

Stories

Knowledge Base

Home Network Community > 5G/4G Wi-Fi Routers/MiFi > Archer MR400 previously working. No internet access

< 5G/4G Wi-Fi Routers/MiFi

Archer MR400 previously working. No internet access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR400 previously working. No internet access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Nori87

2020-07-06 11:11:38

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-07-06

Archer MR400 previously working. No internet access

2020-07-06 11:11:38

Model: Archer MR400

Hardware Version:

Firmware Version:

I have been using the router for over a month, contiously taking in and out the SIM card from the router. Everything was working fine.

Today, when I inserted the SIM, I did not have internet connection.

I have set back to factory all configurations as well as I have downloaded the logs to troubleshoot the issue. One of the most concerning messages is: "2016-01-01 00:03:04 [6] 4G: ERROR: Get sim card number failed (0)."

Still, the SIM works fine on my mobile phone.

It is worth mentioning the sticker used for the SIM is a bit broken and less sticky that it was.

Thank you

1 Reply

Sunshine

2020-07-10 06:01:23

Posts: 7375

Helpful: 1195

Solutions: 915

Stories: 0

Registered: 2018-12-17

Re:Archer MR400 previously working. No internet access

2020-07-10 06:01:23

@Nori87

Hello，

May I have a photo of the sticker with a bit broken?

For your case, please contact your ISP and get the APN of SIM card, then create an APN profile as the instruction below:
https://www.tp-link.com/en/support/faq/2468/
Kindly note that the APN information including APN, Username, and password, etc. are provided by your ISP.

Please insert another SIM card to the router, then check if it can work well.

If still no Internet, please help us confirm some information:

1. When did you buy a tp-link device and when did the issue start?

2. May I know who is the ISP?

Here is an instruction you can refer to access the web interface of the router: https://www.tp-link.com/en/support/faq/2838/

3. After creating the APN file, please wait for 5 mins and help us collect the system log:
Advanced -> System Tools -> System Log-> Save Log and send to us

4. Advanced > Network > Internet, send us a photo of your Dial-up settings
Advanced > Dial-up > ISP Update, check the ISP Version and send to us
Advanced> Firmware upgrade > check the Firmware version and send to us

5. May I know the hardware version on the label of your 3G/4G router?

May it help and have a nice day!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.

Archer MR400 previously working. No internet access

Archer MR400 previously working. No internet access

Information

Voters 0

Tags