Archer MR600(EU) V1 - BETA Firmware - Allowing selection of 4G+bands for Archer MR600 manually
Hi all,
Following the long thread on the same subject discssing the BETA FW, as I said I would, TPLink have given me permission to share the FW download llink.
From TPLink - We recently released a beta firmware for Archer MR600(EU) V1 which can allow us to select 4G+bands for Archer MR600 manually.
https://static.tp-link.com/2020/202004/20200420/Archer_MR600v1_1.1.0_0.9.1_[200417-rel75138]_up_boot_2020-04-20_08.44.31.zip
For Archer MR600, if you want to use its 4G+network, your SIM card should support the CA bands group Archer MR400 supports. Please check the attached picture and check if your SIM card supports the band groups on the list or not.
They asked me to state that, this BETA FW is for the Archer MR600(EU) V1 ONLY!
Neither TPLink nor me take any respnsbility if you flash a none-EU router.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@AkashDev hi Akash,
LTE always need two antennas to work to its full extent. This is necessary to achieve spatial diversity/ MIMO. Hence gives you better throughput. All modern LTE ROUTERS having mPCI always use two antenna ports.And it's adviced to purchase router have (Atleast) 2 external antenna ports.Hope this helps.
- Copy Link
- Report Inappropriate Content
Hey Jose,
The beta firmware is available on page 1 of this thread. Please go through the instructions before updaing the firmware.
- Copy Link
- Report Inappropriate Content
Today i tried the custom firmware, my findings are as below
IDEA/Vodafone: there is a near by tower with good signal all i get is arounds 21 mpbs (download) most of the time, it broadcats only Band 3, tried 3,3 BANDA and BANDB. no CA and only locks in BAND3. So either 3,3 is not supported by router or CA not supported, not sure.
JIO: i found BAND 3 and BAND40 in my area, BAND 3 has much better signal then BAND40, but my iphone always locks into BAND40 thus somewhat nil internet, luckily with the modem selection option i can select BAND 3 and some what internet is working. NO CA tried 3,3. 3,40 and 40,40 nothing Worked
Airtel: By default i see 4G+, i saw 3,40 but network signal is pathetic. 25% to nil hardly gets 1MPBS.
BSNL: tower visible through window next road, no 4G services yet (damn!)
My Question is weather Carrier has to support CA or This modem not picking up the band or if am missing something?
for worth of the investment on this router, for me in order to exploit CA feature is to stick with Airtel, since by default its CA, i dont find any worth of manual selection since i couldn't achieve CA through it for jio or idea. if that the case i could have bought MR200 or MR 400 for half the price and in the forum i see beta relase which enables to select band.
I am planning to now buy and mount 12DBI LPDA hoping that i get the far away Airtel signal, On Amazon oxywave LPDA with 10 mts LMR 400 comes to 4k, since we need two it will come to 8k. but as suggested by few members here, HLF400 10mts with antennas in pair comes by around 2 to 3k. Am confused whether to go with oxwave with hefty price or to stick with chinese coaxial Cables for cheaper price?
- Copy Link
- Report Inappropriate Content
Why don't you try something like this, which comes at < 5K cost?
I myself have not tried this. I'm also in the same boat as you. This is one option I'm considering given the high cost of oxywave setup.
- Copy Link
- Report Inappropriate Content
@AkashDev check this video he has does this for less price.
https://m.youtube.com/watch?v=Q6XRQCBg8wM
- Copy Link
- Report Inappropriate Content
@TaZ30 I already ordered from the same seller waiting for that to be delivered. They Quoted - N F TO SMA M HLF400 10 MTR - 490/PCS, 12 DBI LPDA antenna - RS 550/PCS
shipping and taxes Extra. will try out the setup and post it here.Thanks for the video, i have now some idea
- Copy Link
- Report Inappropriate Content
@AkashDev Hi Akash,
These should work . But you have to be precisely point it to a tower with line of sight to get most benefit out of it.
Mount them 90 degrees to each other. The spacing between them also matters depends on what frequency you want to receive.( More the spacing always better) And to get good isolation and avoid coupling.
Hope it helps 🙂
- Copy Link
- Report Inappropriate Content
@AkashDev You have a choice to buy LPDA, which for sure will improve overall quality of signal and hence better speed. I am using LPDA for Airtel, with tower located about 500 meters away. ( I have one more tower just about 200 meters away, but no visibility due to my flat position in apartment).
I have 2xLPDA https://www.amazon.in/gp/product/B07ZJV67RN/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
I bought LMR400 cable https://www.amazon.in/gp/product/B06XPC4S43/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I cut the cable, each of 5 meters. LPDA antenna in link is little legthy in size compared to other LPDA's in market. It is not YAGI, it is not 9/10 dBi. It is LPDA and it is 12 dBi. Product dispatched from Mumbai - with painfully bad packing. So if you live in and around Mumbai, yes you should buy. Else if you receive it with packet open, reject and buy again (may luck prevail here).
Used a PVC pipe, fixed on balcony rails and antenna mounted on it. 60-65 mbps download, 17-19 mbps upload is the speed I have now.
Importantly, I left TPLINK MR600 in balcony itself. Protected it from rain/sun with a postbox https://www.amazon.in/gp/product/B07YFQ4K4Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
OK. Cost of Antenna INR 3198/- Cost of cable INR 1798, Cost of post box INR 650/-. Total cost INR 5646/-
Though fibre link is available in my apartment, I did not take fibre connection because of 2 reasons:
1. I live in a rented premise. I understood from service provider that I will have to shell out 3000/- towards internal wiring (Why will I do for a rented house?)
2. Frequent disconnections for users - more to do with rains, road digging etc., sometimes people with subscription wait for 7-10 days for service to resume.
If investment is worth, yes, please explore. May be, I also can be of some support to you.
- Copy Link
- Report Inappropriate Content
@Abhi093 In the line of Sight, there is a building in between the tower. I am wondering if the antenna would pick up the signal. Need to check. thanks
- Copy Link
- Report Inappropriate Content
@AkashDev in such case I would always suggest to use mimo (dual/cross polarization) antenna . While one antenna focus on signal from the tower , the other busy in catching the reflections from objects like walls, trees, objects etc...
PS: towers in your area must use mimo transmission antennas to get the benefits of above mentioned statement. I hope Airtel and Jio use 2x2 mimo Radio transmission all over India.
Nevertheless always mount directional antenna (s) pointing the Cellular mast.
Hope that helps 😊
- Copy Link
- Report Inappropriate Content
Information
Helpful: 13
Views: 196739
Replies: 506