@darant great job

@john.awad 

sorry, I misread my version, I'm using v1 EU. the problem is there's an error when upgrading my firmware. It says 

Error Code : 4503

@dvyx  Hmmm in that case I^m not sure. Maybe redownload the firmware? Or ask support.

Are there any chances that a beta firmware for MR6400 v3 with this feature will be released?

Hi

In a next update could be added some functions for data usage monitoring? Having a maximum of 50GB or 30GB or 70GB/month, an estimation of data usage is important, then the router should send a periodic report. It could send a SMS or an email (from me to me) 1 time a day, or 2 or 3, or 1 time a week or every 500MB or 1GB or 2GB of data usage (selectable).

Thanks

Gianluca

About WiFi transmitter power: it seems that the Transmitting power has non effect on the signal at the receiving device... I've noticed it in the original firmware and in the selectable bands firmware. Does anyone else have noticed it?

I have installed the firmware "only for test confidential" and it's a big work...my modem now run in 4g+ when before it haven't.

Mobile HO Italy = Vodafone --->band 1 select 20 and band 2 select 1 = result --> 4G+

But my problem is the ghost network that appear sometimes and disappeared in 2,4Ghz

look here:

http://www.imagebam.com/image/e365e91344909904

and the power of the two wifi network that run up and down...why?

Is a problem with my device or all of you have this problem?

Do you have these problems?

thanks

Can someone enlighten me what is the reason why I cannot upgrade my device?

here's the screenshot.

https://i.imgur.com/mPAWd0E.png

I already hard reset it, I still cannot upgrade my firmware.

@dvyx hi, are you expanding the firmware file? I can't 100% remember if I had to do this prior to updating.

Yes, make sure you are uploading the .bin file from in the zip, and not the zip?

I seem to only be able to connect on a single band "3". In theory Three in the UK should be able t connect on "3,20, occasionally 1".

Is it likely that the mast (literal line of site antenna to the mast) is not running a second band and therefore not allowing carrier aggregation? (and that no other masts are in range?

Or is it a restriction from elsewhere?

It is no concern - getting 80/30 speeds ISH. So more than good enough, but curious.

I do however seem to get a lot of websites that timeout or fail to connect due to SSL, on the first load.

Any ideas on the cause for this on the new firmware?