@darant 

sorry for my question....but with this firmware is deleted the problem with ghost 2,4Ghz network?

dvyx wrote

Hi ! When is the expected date that this firmware arrives to other versions? I'm using v4

@dvyx are you sure you have an MR600? As far as I know the MR600 only has v1 

@darant Hi everybody

Hello everybody

I also have an MR600 for 2 months now and I am generally very happy with it.
I am about 900m as the crow flies from the relay antenna and I pick up the banders B3, B7 and B28. By cons the modem connects systematically to B3 and B7 but never on the B28. I get 156Mbits / s in Download and only 5 Mbits / sec in upload.

https://www.speedtest.net/result/9508661323

On the other hand, my phone is always on the B28 which has much higher upload speeds than the B3 and B7 combined.(Ping is better with B28)
So this update to choose the band will be really too cool for me.

First of all I would like to know if this firmware works on an MR600 in France?
If yes, is it possible to easily revert to the old firmware?

Thank you in advance for your answers.

Ayoros

Hi all

I still don't undersand how the MR600 chose the bands when Band select is not active...

If I select B7+3 (4G+), DN is 20Mps and UP is 10Mbps, but if switch off Band select,

it switches to B3 only (4G): DN is 2,8Mbps and UP is 3,4Mbps...

In the morning, I selected B20+3 (4G+): DN 22Mbps and UP 11Mbps.

In the afternoon, the router can't connect to B20, then it switched to B3 only. If I switch off Band select, it uses only B3!

Why in auto band select it doesn't switch to B7+3 (4G+)?

It would be very useful if I could make a preference list, i.e.:

B7+3 (4G+)

B20+3 (4G+)

B20+7 (4G+)

B7 (4G)

B3 (4G)

The best would be if it could chose automatically the best bands!...

@darant 

Im install beta firmware and i test all the configuration (in france with Free operator)

Now i choose B28 and B7 and i have an upload to 20Mbits/sec

My download is not so good but it's a good compromise

B7B3 = DL 156 Mbits/sec and  Up 5.6Mbits/sec

https://www.speedtest.net/result/9508661323

B28B7= DL 138 Mbits/sec and  Up 19.3Mbits/sec

https://www.speedtest.net/result/9509025278

Thx for this beta

Hi @BzhAyoros, 

Yes this firmware should work on your MR600 in France. I honestly don't know if you could revert to the stable version (I haven't tried, but you can find it here: https://www.tp-link.com/my/support/download/archer-mr600/#Firmware ) 

@john.awad Make a backup, I think its reversable.

@darant 

Ok thx @john.awad 

when the final firmware will be released will it be available directly in the update area in the routeur or will it be necessary to reinstall the old official version?

@Datman I think the dual band only works in 5Ghz.... It does on mine..