TP-Link OneMesh™ VS Deco Mesh: What's the Difference?
TP-Link OneMesh™ VS Deco Mesh: What's the Difference?
OneMesh™ and Deco Mesh are two whole home mesh Wi-Fi solutions provided by TP-Link. Though both support mesh networks, they are used by different products and are not compatible with each other. Since it’s pretty easy to mix up these two solutions, this article is going to show you how TP-Link OneMesh™ and Deco Mesh work differently while providing some tips for using them. Pick the perfect one to enjoy the best possible whole home Wi-Fi experience.
Deco Mesh
Deco Mesh is technology only used in TP-Link Deco products (Full List) for Mesh networking. Deco replaces a collection of routers and range extenders with an intelligent Wi-Fi system made up of multiple units working together seamlessly. It adapts as your Wi-Fi needs change and uses complex algorithms behind the scenes to automatically and efficiently route data along the fastest path. For more about Deco Mesh, refer to How Deco works.
All TP-Link Deco models work together. Just choose one as a main Deco (follow the priority order when choosing the main Deco: Deco M9 Plus/Deco P7 > Deco P9 > Deco M5 > Deco M4R > Deco E4R). Then follow the Deco app instructions to set it up. After configuring the main Deco, add other Decos one by one onto the mesh network via your Deco app.
After setting up, you can manage your mesh network on any of the Deco units, and the modifications will be synchronized to others on the mesh network instantly. You can also swap out the main Deco and replace it with any of the Deco units on your Deco app easily.
Deco units support Ethernet backhaul connections, which means every two Deco units—even different models—can be wired with an Ethernet cable and will transmit data between the two units through the Ethernet connection, which is more stable and faster than wireless connections.
Don’t forget, though, Ethernet backhauls and wireless backhauls can’t work at the same time. Once an Ethernet backhaul is established, the wireless backhaul will disconnect automatically. So to use an Ethernet backhaul connection, you don’t need to wire every Deco unit. Instead, you can set up one for Ethernet backhaul and the others for wireless backhaul at the same time if you want.
For example, if you have three Deco units and want to create Wi-Fi not only in your living room and bedroom but also in the office a little far away from the other rooms, which has no Wi-Fi coverage, you can put the main Deco and satellite Deco 1 in your living room and bedroom (wireless backhaul). As for satellite Deco 2, you can place it in the office with a long Ethernet cable connected to the main Deco or satellite Deco 1 unit. In this case, the satellite Deco 2 unit will work through an Ethernet backhaul, while the main and satellite 1 will work through wireless backhaul.
OneMesh™
OneMesh™ is a trademark for various TP-Link SOHO products which support mesh networking, including Wi-Fi routers, DSL modem routers, 3G/4G routers, range extenders, and Powerline adapters. You can check whether your devices support OneMesh™ with the Compatibility List. For more about TP-Link OneMesh™, refer to the following:
OneMesh™-Create a Whole-Home Wi-Fi Network with Your TP-Link Devices
To set up a OneMesh™ network, you can use a OneMesh™ wireless router, modem router, or 3G/4G router with several sets of range extenders or powerline adapters. One thing to note, however, is that two OneMesh™ routers cannot create a mesh network. A OneMesh™ router can only be combined with OneMesh™ range extenders or OneMesh™ powerline adapters to build mesh networks. You can add a bunch of OneMesh™ wireless range extenders or powerline adapters, but only one OneMesh™ router is needed on the same mesh network. Wireless routers only support OneMesh™ while in Router mode, whereas modem routers support OneMesh™ on any operation mode. To make full use of two routers, you can set them up separately and create two OneMesh™ networks with network expansion devices.
To add more extenders onto a OneMesh™ network, generally we suggest connecting all the extenders to the router for better performance. You can also connect one extender to another one already connected to the router. But we don’t recommend adding more than two extenders to one single link chain in consideration of Wi-Fi quality.
Unlike a Deco Mesh network, a OneMesh™ router acts as the management center on a OneMesh™ network. You can set and modify the wireless settings such as network name, password, and advanced features like Access Control and QoS on the router. The router will then synchronize to your extension devices. Do note, you would no longer be able to modify these items on any of the extenders on the OneMesh™ network separately.
Another difference is that OneMesh™ products do not support Ethernet backhaul now. Wireless backhaul, however, is still available. If you want to enjoy a seamless connection between dual-band networks, you need to manually enable Smart Connect on your host router. Then your host router’s 2.4 GHz and 5 GHz bands will share the same SSID and password.
In summary, though Deco Mesh and OneMesh™ support Mesh networking, they are totally different technologies used by different TP-Link products, so they cannot build a mesh network together or with other brands. Choose one of them based on your actual needs and start building a seamless whole home mesh network for your home today.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@bd134 I am able to use the OneMesh with RE505x and MR600, although on the RE505x is says its not compatible, it was recognize on the MR600. So far the roaming function is good.
- Copy Link
- Report Inappropriate Content
@JDC So in fact you're NOT using both.... You switched off the wifi of the roiuter (which is the Onemesh device) and only use deco....
- Copy Link
- Report Inappropriate Content
I am using both devices (I use the Archer as the router to reserve IP addresses, for example), but I am only using the Deco for wireless.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, thanks for the write up. Still some questions about their differences.
For OneMesh:
(1) Will OneMesh create multiple SSID for every extenders? That is, does client device needs to connect/use different SSID to connect if device is moving from extender A to extender B)?
(2) Does extenders cut effective transmission bandwidth into half since the extender needs to communicate with client device wirelessly and then communicate with main router wirelessly also?
(3) Is there a "total devices OneMesh can connect" for OneMesh? Is this number limited by the router no matter how many extenders I have?
For DecoMesh:
(4) Can I create a Deco Mesh with 5 nodes in following way? First one as the "main" ( is there still a main node? ) Set up "node 1" wirelessly linking to "main" and ethernet backhull linking to "node 2." In the mean time, set up "node 3" wirelessly linking to "main" and again ethernet backhull linking to "node 4." Is this possible?
(5) I wanna two networks available throughout all the Deco Mesh, one as the main SSID, and another as guest SSID. Are they both available on all 5 nodes all the time? Dose the "total client devices one Deco Mesh can support" mean the sum of both networks or the max are per SSID?
Thank you for your help in advance.
- Copy Link
- Report Inappropriate Content
@TP_TechWriter can you please tell me the pros and cons of both? Which one would give me a better and fast connection considering I go with the same wifi standard for both (for example, AX1800)?
I am thinking that a good router with a good extender would give me better performance as the router is huge and has external antennas etc. whereas the deco router is small, has less number of internal antennas but I am just guessing here. A professional advice would very much appreciated.
- Copy Link
- Report Inappropriate Content
https://www.reddit.com/r/thebatmanstreams/new/
https://www.reddit.com/t5x8rf/
- Copy Link
- Report Inappropriate Content
I feel you. I'm here researching ways to upgrade my existing network of x60s. I wish I had known how restricted they were when I bought into them. I was hoping an archer could act as a main hub for them I guess my research is done. I'll just get by with them until they're obsolete, then find a company that is more open.
- Copy Link
- Report Inappropriate Content
@Beavis I now use a 4G SIM card in an Archer MR600 as the main router, and use an Ethernet cable to connect to a DECO M4R, with wireless connection to a second DECO M4R (3 devices). I do turn on both systems' wireless connection, but with different SSIDs such that I can tell which wi-fi system I am connecting to. I also noticed the DECO will drop signal from time to time, although it comes back quickly, it was very annoying when playing an online game. I had not observed a similar issue with Archer MR600. Before using a 4G SIM card as input, I was able to use the Archer MR600 as a regular router that connects to the Internet. Currently I don't have the need to extend my TP-Link OneMesh network, as I bought DECO first and MR600 months later for 4G connection and Ethernet backup. Otherwise, I might be able to run both TP-Link OneMesh and Deco Mesh under one roof (4 devices total), with an Ethernet cable to connect both systems. Honestly, while I think MR600 with wi-fi extender such as RE505X should be enough to satisfy my needs, but given that I bought DECO M4R first (each with 2 Ethernet ports), and all existing TP-Link wi-fi extenders have only one port, it does take some time to determine what device(s) to purchase and connect.
- Copy Link
- Report Inappropriate Content
@JDC Same here. I bought an Archer AX55 and DECOX20 thinking to take advantage of the processing power of the router and extending the wifi network through my home. :( One Mesh - Deco Mesh should be clarittfy everyhwere they are different thing and no compatible
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 71979
Replies: 57