Link but error on logs

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Link but error on logs

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Link but error on logs
Link but error on logs
2013-01-17 03:43:38
Region : Spain

Model : TD-8817

Hardware Version : V7

Firmware Version : 7.0.0 Build 120509 Rel.32092

ISP : Jazzel


I am getting the following error on my modem although the connection is up and running

1/16/2013 21:35:2> LLC 1483 unknow protocol

1/16/2013 21:35:35> netMakeChannDial: err=-3000 rn_p=8050ce4c
1/16/2013 21:35:35> Last errorlog repeat 2 Times
1/16/2013 21:35:35> netMakeChannDial: err=-3000 rn_p=8050ce4c
1/16/2013 21:35:35> Last errorlog repeat 2 Times
1/16/2013 21:35:41> LLC 1483 unknow protocol

http://imageshack.us/photo/my-images/822/ppoeconf.png/
http://imageshack.us/photo/my-images/29/adslconf.png/
http://imageshack.us/photo/my-images/822/adslstats.png/

My provider said that I had to change to Dynamic and MTU but there is no link. Finally I recovered the link coming back to PPOE/PPOA and I changed the MTU to 1492 but the error logs still appear.

Current config: http://imageshack.us/photo/my-images/29/currentconfig.png/

I also tried by changing the bridge options but no changes.

Thank you,
Regards.
  0      
  0      
#1
Options
5 Reply
Re:Link but error on logs
2013-01-17 05:58:59
Your internet connection is stable?
  0  
  0  
#2
Options
Re:Link but error on logs
2013-01-19 10:00:11
Ping with google is stable, but there are some tcp/ip strange behaviours (connections lost) and the browser some times is not able to return the url, you have to press F5 several times (This problem does not happens with the original isp router).

Thank you!
  0  
  0  
#3
Options
Re:Link but error on logs
2013-01-20 00:57:12
For test, please try to enter DNS addresses to your network card in computer.
  0  
  0  
#4
Options
Re:Link but error on logs
2014-05-21 04:32:11
Hi to all,

I've the same error:

netMakeChannDial: err=-3000 rn_p=8050ce4c

sometimes connection go down and I've to wait 5 minutes before trying again.

someone have any idea?

here my configuration:

Firmware Version: 7.0.0 Build 120509 Rel.32092

ADSL Firmware Version: FwVer:3.18.1.0_TC3087 HwVer:T14.F7_9.0

encapsulation: PPPOA

Regards
Alessandro
  0  
  0  
#5
Options
llc 1483 unknow protocol
2014-12-30 19:47:57
Since this thread came top of Google's results for the above error, I thought I would inject some useful information into this thread.

I have a TD-W8961ND with the latest firmware 140305 and I was seeing the "llc 1483 unknow protocol" error in the system log (as well as the netMakeChannDial: err=-3000 rn_p=804d0c00 error which I am still seeing).

Okay this I how I solved it;

I went into Interface Setup -> Internet

I am using Virtual Circuit PVC6 but I noticed that the other virtual circuits (PVC0-PVC5, PVC7) defaulted to Activated.

That didn't seem correct, so I individually set them to Deactivated and clicked on SAVE for each one, just leaving PVC6 as the only Activated VC.

After that no more "llc 1483 unknow protocol" errors!!

Hope that helps somebody.

Anybody know how to stop the " netMakeChannDial: err=-3000 rn_p=804d0c00 " errors?
  0  
  0  
#6
Options