Dropping Connection - Deco P9
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Please Note - I have no idea what hardware version I have and the actual system I have is the Deco P9 (I only had the option of P7 in the drop down list).
Ok, on with the problem....
I have recently set my system up and I couldn't be more happy, however I have two PC's in the house which utilise the new Wifi network. Since doing this one of the computers keeps logging itself off and the only way to reset this is to turn the computer off and on again and logging into the wifi again. As the week has gone on it has gone from doing it every hour or so to approx every 20 mins.
It may well be a coincidence, but this computer has never done it before. As you can imagine this is very frustrating, has anyone experienced this and come up with a solution.
Thanks in advance for any help.
Flipper71
Thanks for your reply, I'm not an expert regarding all settings, but you have given me a couple of things I knew I could try.
Firstly, I confirm that the connection was completely lost and the computer needed to be logged back opto the Deco. I have however had a look at the driver and it did indeed need to be updated, I have therefore done that. Whilst doing it I also noted that within 'Power Management' within the driver properties the box was ticked for 'Allow this computer to turm off this device to save power'. I accept that it may be a coincidence, but for now I have deselected this box. I will just try this tommorrow before trying any other setting changes and see what happens with this pc.
Hopefully I report back tomorrow with good news.
Thanks
Paul
