VR600v behind another router?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.VR600v behind another router?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
The short question - Please can you provide step by step instruction on how to setup the TP-Link behind another modem/router.
The long version:
I don’t yet have a NBN fibre connection but want to try out the TP-Link in the meantime. I currently have Optus HFC cable connection with a Cisco modem/router/voice ports.
So I am trying to connect the TP-Link VR600v behind the Cisco with Ethernet cable so I can access the internet through the TP-Link wifi or Ethernet connections.
Cable Internet ———> Cisco Modem/Router ———> TP-Link VR600v ———> WI-FI/Ethernet to devices...
However I am having some troubles. I can log into the TP-Links IP address but I can’t access the internet.... or after changing settings sometimes I can access the internet through the TP-Link Wi-Fi but then I can’t access the TP-Links IP address. It is one or the other which works and never both.
i followed instruction for a different TP-Link model but it didn’t work.
I have logged into the TP changed the IP address etc but I can’t get it working properly.
Please can you provide step by step instruction on how to achieve what I’m trying to do.
I also couldn’t get the VOIP to register even when the internet connection was working but perhaps this will be resolved once I have resolved the other issues.
Many Thanks!
P.S. I have an old modem/router which I have plugged into my Cisco modem/router and it just works! Why is it so hard to achieve this with the TP-Link?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Cause the Archer VR600v works as the DSL modem router by default, if you want to install it behind another router, you need configure it as the wireless router mode or access point mode.
The instruction to configure it as wireless router mode is https://www.tp-link.com/support/faq/1731/
While cause there is a router already, to avoid double NAT issue, it is suggested to configure it as an access point.
Instructions as below:
https://www.tp-link.com/support/download/archer-vr600v/#video
https://www.tp-link.com/support/faq/2655/
May it help.
- Copy Link
- Report Inappropriate Content
Thanks for the reply. I have followed the guides and it does not work. I have wasted way too much time. I have factory reset it and will return it to the shop and buy a different brand.
Even if the device was free it is not worth the waste of time and frustration.
- Copy Link
- Report Inappropriate Content
I see, sorry for the inconvenience. You can return it and get a network expansion device directly, like range extender or access point.
To those who may concern, when the Archer VR600v works as a wireless router, the modem/router need connect to the LAN4/WAN port of the VR600v; And when it works as an access point, we need change the IP to the same subnet, disable DHCP server and connect the LAN port to the main router to make it work.
Good day.
- Copy Link
- Report Inappropriate Content
I bought the VR600v because I need a new modem & router for upcoming NBN fibre connection and I wanted to test the wifi and VoIP features in the meantime. I would have been using the full modem router in the near future.
Even when the internet did work through the VR600v with bridge mode the voip still would not register. I enter the same details into any sip app and it works.
I connected the two routers with Ethernet cable into the WAN port of the VR600v. I set the VR to wireless router mode and IP to the same subnet as main router. I also disable DHCP server and reboot both routers.
I will buy a different brand modem and router for my new connection.
Thanks
- Copy Link
- Report Inappropriate Content
A quick question, do the other lan ports work or are they disabled when in 'bridge' mode?
- Copy Link
- Report Inappropriate Content
The Archer VR600v supports VOIP functionw hen it works in wireless router mode.
As you mentioned, you connect the main router to the WAN port of the Archer VR600v and change it to wireless router mode, theoretically, the VOIP will work once you set it up; while cause you changed the IP to the same subnet and disabled the DHCP server, first, the LAN IP and WAN IP cannot be in the same subnet; and you need setup static IP for the clients which connect to the VR600v to make it access internet.
Anyway, like I said before, we value and respect any decision you made, you can order another device to satisfy your needs, and hope there will be a chance to work with you in the future.
Good day.
- Copy Link
- Report Inappropriate Content
What do you mean bridge mode? At our side, bridge mode means that the DSL modem router works as a pure modem, which is used to synchronize the DSL connection, no other usage. Then you need connect another router to it by wired cable and configure it with the parameters given by ISP to make it work.
While if you means the wireless router mode or access point mode, the LAN ports still work, and you can connect your device to the LAN port to get internet.
May it help.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3343
Replies: 17
Voters 0
No one has voted for it yet.