Unable to manually set a specific 4G band (MR600)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I was unable to find a setting to manually force the use of a specific 4G band.
For example, sometimes the router uses the band 20 instead of 1/3/7 which are much more faster than the 20 one, resulting in a drastic reduce in network speed.
I know for sure that with router of other brand is possible to set this option. Is it possible to enable it with a (beta) firmware update?
Thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @StefanM and all
Like I mentioned on this thread, we would push forward them to do something and pay more attention on this feature.
For more details, you can see my answer there. https://community.tp-link.com/en/home/forum/topic/193174
- Copy Link
- Report Inappropriate Content
Update:
There has already been a beta firmware that could manually choose the network band.
If your sim card carrier supported 2CA, you could go to basic>internet to fix two CA bands.
Thank you!
- Copy Link
- Report Inappropriate Content
Thanks for your requesting. We do receive some similar feedback and have reminded related department.
They work on it now and evaluate the feasibility to add it in the next firmware.
May I know how do you know which band is better/faster? Is there any test you have done?
Thanks in advance, and have a nice day.
- Copy Link
- Report Inappropriate Content
Many thanks for your reply.
I really appriciate if there will be a firmware upgrade to enable that function.
Yes, i did a little bit of testing. Band aggregation with the 20 one (and 3 for example) shows a speed at about 25/30 Mb/s.
Instead, with 7 and 3 download speed increases up to 130 Mb/s.
In italy, the band 20 is the slowest one:
| Frequency | Technology | Frequency numbering |
|---|---|---|
| 800 MHz | FDD | Band 20 |
| 900 MHz | FDD | Band 8 |
| 1500 MHz | SDL | Band 32 |
| 1800 MHz | FDD | Band 3 |
| 2100 MHz | FDD | Band 1 |
| 2600 MHz | FDD | Band 7 |
| 2600 MHz | TDD | Band 38 (test) |
- Copy Link
- Report Inappropriate Content
I just posted a similar thread, in my opinion the ability to select which band you'd like to use is an essential option.
It means the difference between 30mb download on band 3 or closer to 200mb on band 7.
Hoping that TP Link add this into firmware soon else I will have to return the router and purchase a Huawei which allows this feature.
- Copy Link
- Report Inappropriate Content
Totally agree with you
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Really need this feature. I'm also seeing slow speed issue due to slow speed band is selected. for me signal varies alot 25% to 100% on router but i don't see this variation on same network.
- Copy Link
- Report Inappropriate Content
Sorry to tell you that there is no update yet.
For the speed issue, you can create the network connection profile manually and adjust some wireless settings to optimize its performance.
https://www.tp-link.com/support/faq/1663/
Besides, please ensure that the firmware is up to date.
And we will push forward our product engineer with the feedback received.
Good day.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Dont see how custom ISP setting would solve the LTE band lock. Please put prio on this (FW with 4G band function). Even portable MIFI:s have it...
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 23558
Replies: 53
Voters 2
