Problems with "RemoteAccess"
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi friends,
i have bought the deco p7.
I used them for Wlan
My fritzbox is the 7360
Everything works really good an fast.
i have only one problem.
Since the Decos are in use, i am not able anymore to remote access any other computer.
The root is clear, but i do not know how to solve it.
Lan IP (FritzBox): 192.167.172.xxx
Wlan (Deco): 192.167.64.xxx
Can please somebody help my
Thanks a lot
Regards
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
What is the current network diagram? How do you connect these devices together?
What is the current operation mode of Deco P7? Is it router mode or AP mode?
From the IP/Subnet you provided, they are in different subnets, theoretically, devices connected to them won't be able to access each other.
Good day.
- Copy Link
- Report Inappropriate Content
@Kevin_Z
I have switched off my wlan from my fritz box.
So they act like wlan routers
Means,
from LAN Port of my fritz box i have connected the "main" deco p7.
Deco p7 make the Wlan (i have 3, for every level in my house one)
It works fantastic, i have really good network in my house.
But i am not able to remotly access the Wlan devices
Thanks
- Copy Link
- Report Inappropriate Content
So do you connect them like Fritz box (wifi off)---Deco P7--wireless devices? And you cannot access the WLAN devices remotely?
What is the operation mode of the Deco P7? Router mode or access point mode?
As I mentioned on my last reply, the LAN IP of the Fritz box and P7 are not in the same subnet, if you want to access the clients remotely, try to open a port for it on the Deco P7 and to build up the tunnel, you need open the port for P7 on the Fritz box which has the public internet IP address.
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
Yes this is my problem
They have not the same submask
Can you please share tutorials how to create such a port and tunnel stuff.
I have never done this before
Thanks a lot
Regards
- Copy Link
- Report Inappropriate Content
Below is the instruction to enable port forwarding feature on the Deco P7.
https://www.tp-link.com/support/faq/1797/
Then you need open the port for the Deco P7 on the Fritz box so that you can build up a tunnel for the server which you can access it remotely.
For the instruction to open port on the main router, you can give a call to their tech support.
Good day.
- Copy Link
- Report Inappropriate Content
@Kevin_Z
I did it for one wlan device
In fritz box i have choosen the "deco-p7" as port forwarding.
So in the RemoteApp i choose the IP from the "Deco-p7" and i receive one wlan device
But how do i receive all the other Wlan devices
I have only one IP (this one from the deco-p7)
Deco-P7
192.165.150.53 (Main FritzBox Net)
Deco-P7 makes is own Wlan net
- 192.165.50.1
- 192.165.50.2
- and so on
But in the WindowsRemoteApp i can only insert the IP from the Main Fritz Box Net
How do i reach all the other devices
Thanks a lot for teaching a newbie ;-)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 882
Replies: 6
Voters 0
No one has voted for it yet.