What about Archer MR200(EU)_V4_20190730
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
It is the latest firmware for Archer MR200 V4, which fixed CVE-2019-9888 discovered by IBM to increase security.
https://www.tp-link.com/es/support/download/archer-mr200/#Firmware
Please be assured of it, it is the oficial firmware, while there is not much settings changed, that is why the size is smaller than the old ones.
Good day.
- Copy Link
- Report Inappropriate Content
Good morning @Kevin_Z ,
i've updated my Archer MR200 with this firmware. All is ok.
Thanks a lot !
Best regards,
- Copy Link
- Report Inappropriate Content
hi there!
this isn't official, IIRC
apparently IT IS ... the link is from the AEU regional site
Although, the size of just 8Mbyte seems not to match the size of the nominal firmware... so i'd be wary to update
Would gladly test a new firmware for my MR200 v4 router since i've a nasty problem with the 3G signal: it keeps "jumping" from 3 LED (1'00%) to none (0%) and back up.
I think that's not normal behaviour.
- Copy Link
- Report Inappropriate Content
It is the latest firmware for Archer MR200 V4, which fixed CVE-2019-9888 discovered by IBM to increase security.
https://www.tp-link.com/es/support/download/archer-mr200/#Firmware
Please be assured of it, it is the oficial firmware, while there is not much settings changed, that is why the size is smaller than the old ones.
Good day.
- Copy Link
- Report Inappropriate Content
Good morning @Kevin_Z ,
i've updated my Archer MR200 with this firmware. All is ok.
Thanks a lot !
Best regards,
- Copy Link
- Report Inappropriate Content
@Kevin_Z I have the same model
Model: Archer MR200
Hardware Version: V4
Firmware Version: 1.9.0 0.9.1 v0001.0 Build 190307 Rel.54196n
I recently switched from Huawei E5573 606 to this. The performance is horrible from Day 1. The router keeps switching from LTE band 1 3 and 40 and gets disconnected every time. Its very difficult to work in these times of Covid 19 when i have to work from home and i get disconnected every 2 mins because of band switching. Please suggest a way out of this, otherwise, customers like me will go back to Huawei as that performs seamlessly against these conditions.
This is quite Urgent!!!! Can we at least get a Beta version like how it was given for MR6400 in some of the other posts?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 2320
Replies: 4
Voters 1
