Archer C7 v5 is emitting a hidden network
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
my Archer C7 v5 is emitting a hidden wifi network that I can't explain.
According to a wifi network analyzer, it's MAC address is identical to the MAC addresses of the 2.4 and 5 GHz network, except that the first 6 entries are AA:DA:C4 instead of the TP-link associated 98:DA:C4. The hidden network has same maxium speed of 216.7 Mbps as the 2.4 Ghz network and allows authentication via WPA2 PSK-CCMP.
The hidden network exists independent of the operation mode (Acess Point or Router) and also if both the 2.4 GHz and 5 GHz networks are disabled.
Any ideas what that is?
Best,
Frederik
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
I got the archer c6 last week and it's been a nuissance ever since. Now it`s working but the hidden network that it emitts bothers me so much. I have no use for it, no deco mesh no nothing.
Why is not there an option to disable it? I think I will return the router and buy something else.
- Copy Link
- Report Inappropriate Content
I bought Archer C6 v2.0 week ago and I agree - this hidden network is really annoying and there should be an option to switch it off.
- Copy Link
- Report Inappropriate Content
I am seeing the same thing on a new AC 1200 A6. Both hidden networks on 2.4 and 5
- Copy Link
- Report Inappropriate Content
Have the same problem on Archer C6 AC1200 v2.0 that came with the latest firmware (january 2020 fixes). TP dudes even made it difficult to install openwrt on the router so m stuck with tp-link's firmware ;-;
- Copy Link
- Report Inappropriate Content
Somebody tried new FW version 200630 for Archer C6V2, if is there possible to disable OneMesh ?
- Copy Link
- Report Inappropriate Content
@MiBi Not possible. We are talking about that here too:
https://community.tp-link.com/en/home/forum/topic/165494
- Copy Link
- Report Inappropriate Content
I am still using 1.2.1 because on newer version are not changing some parameters like channel width after setup in GUI, and also when I disable for example 5 GHz, router still emiting hidden channel regarding one mesh. I am not understand, why is not possible to disable all transmission within wirelles schedule period.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Please pass along to your engineering time one scenario (mine) where the Mesh network always on is a real problem.
I have 2 TP-Link routers both are configured to run in AP mode slaved to my main router. I am in a congested wifi neighborhood and since most of my wifi devices in the house are 5G capable, I only have the 2.4Ghz band enabled on my main router.
I have tried turning off (disabling) the 2.4Ghz band on the TP-Link devices but still have the no-ssid MESH broadcast from both devices. In a congested wifi area with limited open channels, this is a big problem. I want to completely disable those two on 2.4Ghz but they insist on broadcasting the MESH network which I will never use.
This is causing problems with a secondary WIFI network that I have setup for my security cameras with constant interference because I can't turn them off.
I don't want to throw them away as they 5Ghz band works great for my purposes.
Please tell me there's a way that I can completely turn off the 2.4Ghz channel on these.
- Copy Link
- Report Inappropriate Content
@gdog I am having a similar issue with my Deco M4 mesh system, I just wish I could enable/disable the source interface (The hidden SSID in my case) since I use ethernet as the backhaul. :(
- Copy Link
- Report Inappropriate Content
Hello,
As we respond earlier, the hidden wireless network is not a bug, and it is used to build up the mesh wireless network system. For more details, please refer to the below article, which will help answer it:
https://community.tp-link.com/en/home/stories/detail/728
Good days.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 10
Views: 67317
Replies: 105
Voters 6
